A comparative study of MoSi2 coatings manufactured by atmospheric and vacuum plasma spray processes

被引:58
作者
Fei, Xiaoai [1 ,2 ]
Niu, Yaran [1 ,2 ]
Ji, Heng [1 ,2 ]
Huang, Liping [1 ,2 ]
Zheng, Xuebin [1 ,2 ]
机构
[1] Chinese Acad Sci, Key Lab Inorgan Coating Mat, Shanghai 200050, Peoples R China
[2] Chinese Acad Sci, Shanghai Inst Ceram, Shanghai 200050, Peoples R China
关键词
Plasma spray; MoSi2; coatings; Microstructure; Oxidation behavior; OXIDATION BEHAVIOR; DEPOSITION; FILMS;
D O I
10.1016/j.ceramint.2010.10.018
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
In this work, MoSi2 coatings were manufactured by atmospheric plasma spraying (APS) and vacuum plasma spraying (VPS) technologies, respectively. Phase composition and microstructure of the coatings were characterized by X-ray diffraction and scanning electron microscopy. Microhardness, void and oxygen content of the coatings were also determined. Oxidation behavior of the coatings at high temperature was examined. The results showed that the surface of VPS-MoSi2 coating was dense and homogeneous. However, there were many microcracks formed on the surface of APS-MoSi2 coating. The VPS-MoSi2 coating also had lower void and oxygen contents, higher Vickers hardness compared with those of APS-MoSi2 coating. Besides, oxidation resistance of the VPS-MoSi2 coating was better than that of APS-MoSi2 at 1500 degrees C. Published by Elsevier Ltd and Techna Group S.r.l.
引用
收藏
页码:813 / 817
页数:5
相关论文
共 22 条
[1]  
Bhushah, 2001, HDB HARD COATINGS DE
[2]   Investigation of the thermomechanical properties of a plasma-sprayed nanostructured zirconia coating [J].
Chen, H ;
Zhou, XM ;
Ding, CX .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (09) :1449-1455
[3]   PROPERTIES OF MOSI2 FILMS DEPOSITED FROM A COMPOSITE TARGET [J].
CHOW, R ;
NICHOLS, D .
THIN SOLID FILMS, 1984, 118 (02) :139-147
[4]   REACTION SYNTHESIS OF HIGH-TEMPERATURE SILICIDES [J].
DEEVI, SC ;
THADHANI, NN .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1995, 192 :604-611
[5]   MoSi2/Al2O3 FGM:: elaboration by tape casting and SHS [J].
Dumont, AL ;
Bonnet, JP ;
Chartier, T ;
Ferreira, JMF .
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2001, 21 (13) :2353-2360
[6]   CORROSION AND OXIDATION RESISTANCE OF PLASMA-SPRAYED WSI2 COATINGS [J].
KNOTEK, O ;
ELSING, R ;
HEINTZ, HR .
SURFACE & COATINGS TECHNOLOGY, 1987, 30 (01) :107-114
[7]   An experimental study on synthesizing submicron MoSi2-based coatings using electrotherrnal explosion ultra-high speed spraying method [J].
Liu, Zong-de ;
Hou, Shi-xiang ;
Liu, Dong-yu ;
Zhao, Li-ping ;
Li, Bin ;
Liu, Jing-jing .
SURFACE & COATINGS TECHNOLOGY, 2008, 202 (13) :2917-2921
[8]   Oxidation behaviour of particle reinforced MoSi2 composites at temperatures up to 1700 °C Part 1:: Literature review [J].
Lohfeld, S ;
Schütze, M .
MATERIALS AND CORROSION-WERKSTOFFE UND KORROSION, 2005, 56 (02) :93-97
[9]   Pulsed laser-ablation deposition of thin films of molybdenum silicide and its properties as a conducting barrier for ferroelectric random-access memory technology [J].
Madhukar, S ;
Aggarwal, S ;
Dhote, AM ;
Ramesh, R ;
Samavedam, SB ;
Choopun, S ;
Sharma, RP .
JOURNAL OF MATERIALS RESEARCH, 1999, 14 (03) :940-947
[10]   Oxidation behavior of molybdenum silicides and their composites [J].
Natesan, K ;
Deevi, SC .
INTERMETALLICS, 2000, 8 (9-11) :1147-1158