Simultaneous high speed PIV and CH PLIF using R-branch excitation in the C2Σ+ -X2Π (0,0) band

Simultaneous particle image velocimetry (PIV) and planar laser-induced fluorescence (PLIF) utilizing R-branch transitions in the C-X (0,0) band were performed at a 10-kHz repetition-rate in a turbulent premixed flame. The CH lines at 310.690 nm (from the R-branch of the C-X band) used here have greater efficiency than A-X and B-X transitions, which allows for high-framerate imaging with low laser pulse energy. Most importantly, the simultaneous imaging of both CH PLIF and PIV is enabled by the use of a custom edge filter, which blocks scattering at the laser wavelength (below similar to 311 nm) while efficiently transmitting fluorescence at longer wavelengths. The Hi-Pilot Bunsen burner operated with a turbulent Reynolds number of 7900 was used to demonstrate simultaneous PIV and CH PLIF utilizing this filtered detection scheme. Instances where pockets of products were observed well upstream of the mean flame brush are found to be the result of out-of-plane motion of the flame sheet. Such instances can lead to ambiguous results when interpreting the thickness of reaction layers. However, the temporally resolved nature of the present diagnostics facilitate the identification and proper treatment of such situations. The strategy demonstrated here can yield important information in the study of turbulent flames by providing temporally resolved flame dynamics in terms of flame sheet visualization and velocity fields. (C) 2018 The Combustion Institute. Published by Elsevier Inc. All rights reserved.