A new cooling method for vacuum brazing of a stainless steel plate-fin structure

被引：41
作者：
Jiang, Wenchun [1 ,2 ]
Gong, Jianming [1 ]
Tu, S. T. [1 ]
机构：
[1] Nanjing Univ Technol, Sch Mech & Power Engn, Nanjing 210009, Peoples R China
[2] China Univ Petr, Coll Mech & Elect Engn, Dongying 257061, Peoples R China
来源：
MATERIALS & DESIGN | 2010年 / 31卷 / 01期
基金：
中国国家自然科学基金;
关键词：
RESIDUAL-STRESS; INCONEL X-750; TEMPERATURE; DESIGN; JOINT;
D O I：
10.1016/j.matdes.2009.04.039
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper presents a new cooling method for vacuum brazing of 304 stainless steel plate-fin structures with Nickel-based BNi2 filler metal. The tensile tests and scanning electron microscope (SEM) observations have been performed. Quick cooling method and a new developed slow cooling method have been used, respectively, to discuss the influence of cooling methods on tensile strength and microstructures. The quick cooling is performed by dry nitrogen and wind cooling system directly from brazing temperature 1050 degrees C. The new slow cooling method is self-cooling in vacuum furnace from 1050 to 620 degrees C, then it is changed to quick cooling with dry nitrogen and wind cooling. The results show that quick cooling method should not be used because thermal cracks will be created and decrease the strength. The new developed slow cooling method can greatly improve the brazing performance. (C) 2009 Elsevier Ltd. All rights reserved.
引用
收藏
页码：648 / 653
页数：6
相关论文
共 20 条
  • [11] Effects of laser brazing parameters on microstructure and properties of TiNi shape memory alloy and stainless steel joint
    Li, M. G.
    Sun, D. Q.
    Qiu, X. M.
    Sun, D. X.
    Yin, S. Q.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 424 (1-2): : 17 - 22
  • [12] Compact buffer zone plate-fin IHX - The key component for high-temperature nuclear process heat realization with advanced MHR
    McDonald, CF
    [J]. APPLIED THERMAL ENGINEERING, 1996, 16 (01) : 3 - 32
  • [13] SUSUMU T, 2001, ASME PVP, V418, P61
  • [14] Feasibility study on the applicability of a diffusion-welded compact intermediate heat exchanger to next-generation high temperature gas-cooled reactor
    Takeda, T
    Kunitomi, K
    Horie, T
    Iwata, K
    [J]. NUCLEAR ENGINEERING AND DESIGN, 1997, 168 (1-3) : 11 - 21
  • [15] Optimal design of compact recuperators for microturbine application
    Traverso, A
    Massardo, AF
    [J]. APPLIED THERMAL ENGINEERING, 2005, 25 (14-15) : 2054 - 2071
  • [16] An experimental and numerical investigation of flow patterns in the entrance of plate-fin heat exchanger
    Wen, J
    Li, YZ
    Zhou, AM
    Zhang, K
    [J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2006, 49 (9-10) : 1667 - 1678
  • [17] Induction brazing of inconel 718 to inconel X-750 using Ni-Cr-Si-B amorphous foil
    Wu, XW
    Chandel, RS
    Li, H
    Seow, HP
    Wu, SC
    [J]. JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 104 (1-2) : 34 - 43
  • [18] Brazing of Inconel X-750 to stainless steel 304 using induction process
    Wu, XW
    Chandel, RS
    Pheow, SH
    Li, H
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2000, 288 (01): : 84 - 90
  • [19] Brazing temperature and time effects on the mechanical properties of TiC cermet/Ag-Cu-Zn/steel joints
    Zhang, L. X.
    Feng, J. C.
    He, P.
    [J]. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 428 (1-2): : 24 - 33
  • [20] Viscoelastic analysis of rectangular passage of microchanneled plates subjected to internal pressure
    Zhou Guo-Yan
    Tu Shan-Tung
    [J]. INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2007, 44 (21) : 6791 - 6804
12