Heat transfer distribution of impinging flame and air jets - A comparative study

被引：12
|
作者：
Madam, Anil R. [1 ]
Tajik, Abdul Raouf [1 ]
Hindasageri, Vijaykumar [1 ]
机构：
[1] Natl Inst Technol Karnataka, Dept Mech Engn, Surathkal, India
来源：
APPLIED THERMAL ENGINEERING | 2016年 / 92卷
关键词：
Scale analysis; CFD simulation; Jet impingement; Heat transfer; GAS; TEMPERATURE; FLUX;
D O I：
10.1016/j.applthermaleng.2015.09.008
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Heat transfer distribution of impinging flame jet is compared with that of the impinging air jet based on the experimental data reported in literature for methane-air flame jet and air jet impingement for Reynolds number, Re=600-1400 and the non-dimensional nozzle tip to impingement plate distance, Z/d = 2-6. The comparative data based on mapping experimental data reported in literature suggest that there is a good agreement between the Nusselt numbers for higher Z/d near stagnation region. However, away from the stagnation region, the Nusselt number for flame jet is higher than that of air jet for similar operating conditions of Re and Z/d. A CFD simulation for impinging air jet and impinging flame jet is carried out to explain the physics and reason for the deviations observed in experimental data. A scale analysis is carried out to identify the dominant forces and their influence on the heat transfer distribution on the impingement plate. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：42 / 49
页数：8
相关论文
共 50 条
  • [41] A study on the heat and mass transfer properties of multiple pulsating impinging jets
    Xu, Peng
    Qiu, Shuxia
    Yu, MingZhou
    Qiao, Xianwu
    Mujumdar, Arun S.
    INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER, 2012, 39 (03) : 378 - 382
  • [42] Experimental study on heat transfer characteristics of hybrid nanofluid impinging jets
    Sun, Bin
    Zhang, Yue
    Yang, Di
    Li, Hongwei
    APPLIED THERMAL ENGINEERING, 2019, 151 : 556 - 566
  • [43] An experimental study on heat transfer process of multiple mist impinging jets
    LIU Huafei1)
    Baosteel Technical Research, 2011, 5 (04) : 49 - 53
  • [44] Study of heat transfer for a pair of rectangular jets impinging on an inclined surface
    Roy, S
    Patel, P
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (03) : 411 - 425
  • [45] Heat transfer characteristics of impinging air jets under a fixed pumping power condition
    Choo, Kyo Sung
    Kim, Sung Jin
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2010, 53 (1-3) : 320 - 326
  • [46] ON THE HEAT-TRANSFER CHARACTERISTICS OF CONSTRAINED AIR-JETS IMPINGING ON A FLAT SURFACE
    SHOUKRI, M
    CALKA, A
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1987, 30 (01) : 203 - 205
  • [47] Flow and heat transfer from multiple slot air jets impinging on circular cylinders
    Olsson, EEM
    Ahrné, LM
    Trägårdh, AC
    JOURNAL OF FOOD ENGINEERING, 2005, 67 (03) : 273 - 280
  • [48] The effect of nozzle geometry on local convective heat transfer to unconfined impinging air jets
    Trinh, Xuan Thao
    Fenot, Matthieu
    Dorignac, Eva
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2016, 70 : 1 - 16
  • [49] Heat-transfer distribution for an impinging laminar flame jet to a flat plate
    Remie, M. J.
    Sarner, G.
    Cremers, M. F. G.
    Omrane, A.
    Schreel, K. R. A. M.
    Alden, L. E. M.
    de Goey, L. P. H.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2008, 51 (11-12) : 3144 - 3152
  • [50] Effect of mixture composition on heat transfer characteristics of impinging methane-air flame jets of tube burners equipped with twisted tapes
    Kuntikana, Pramod
    Prabhu, S. V.
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2017, 111 : 409 - 422
12345