Heat transfer distribution of impinging flame and air jets - A comparative study

被引：12
|
作者：
Madam, Anil R. [1 ]
Tajik, Abdul Raouf [1 ]
Hindasageri, Vijaykumar [1 ]
机构：
[1] Natl Inst Technol Karnataka, Dept Mech Engn, Surathkal, India
来源：
APPLIED THERMAL ENGINEERING | 2016年 / 92卷
关键词：
Scale analysis; CFD simulation; Jet impingement; Heat transfer; GAS; TEMPERATURE; FLUX;
D O I：
10.1016/j.applthermaleng.2015.09.008
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
Heat transfer distribution of impinging flame jet is compared with that of the impinging air jet based on the experimental data reported in literature for methane-air flame jet and air jet impingement for Reynolds number, Re=600-1400 and the non-dimensional nozzle tip to impingement plate distance, Z/d = 2-6. The comparative data based on mapping experimental data reported in literature suggest that there is a good agreement between the Nusselt numbers for higher Z/d near stagnation region. However, away from the stagnation region, the Nusselt number for flame jet is higher than that of air jet for similar operating conditions of Re and Z/d. A CFD simulation for impinging air jet and impinging flame jet is carried out to explain the physics and reason for the deviations observed in experimental data. A scale analysis is carried out to identify the dominant forces and their influence on the heat transfer distribution on the impingement plate. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码：42 / 49
页数：8
相关论文
共 50 条
  • [21] Simultaneous estimation of heat transfer coefficient and reference temperature from impinging flame jets
    Kadam, Anil R.
    Prabhu, Siddini, V
    Hindasageri, Vijaykumar
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2018, 131 : 48 - 57
  • [22] Numerical study of momentum and heat transfer in unsteady impinging jets
    Chung, YM
    Luo, KH
    Sandham, ND
    INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2002, 23 (05) : 592 - 600
  • [23] Heat transfer investigations on impinging flame jets of a multi-port convex burner
    Kuntikana, Pramod
    Prabhu, S. V.
    APPLIED THERMAL ENGINEERING, 2018, 142 : 793 - 814
  • [24] NUMERICAL ANALYSIS OF THE FLUID FLOW AND HEAT TRANSFER CHARACTERISTICS OF IMPINGING AIR JETS
    Vamsi, B. Venkata Sai Raghu
    Raveendiran, P.
    Sastry, Malladi R. CH.
    JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2023, 18 (04): : 2091 - 2108
  • [25] Flow and heat transfer characteristics of submerged impinging air-water jets
    Piya, Ibroheng
    Kumar, Anil
    Kaewchoothong, Natthaporn
    Nuntadusit, Chayut
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2023, 193
  • [26] Conical coaxial impinging air jets: angle effect on the heat transfer performance
    Burak Markal
    Mete Avci
    Orhan Aydin
    Heat and Mass Transfer, 2020, 56 : 3135 - 3146
  • [27] LOCAL HEAT-TRANSFER TO STAGGERED ARRAYS OF IMPINGING CIRCULAR AIR JETS
    BEHBAHANI, AI
    GOLDSTEIN, RJ
    JOURNAL OF ENGINEERING FOR POWER-TRANSACTIONS OF THE ASME, 1983, 105 (02): : 354 - 360
  • [28] Heat transfer and flow characteristics of air-assisted impinging water jets
    Trainer, Daniel
    Kim, Jungho
    Kim, Sung Jin
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 64 : 501 - 513
  • [29] Conical coaxial impinging air jets: angle effect on the heat transfer performance
    Markal, Burak
    Avci, Mete
    Aydin, Orhan
    HEAT AND MASS TRANSFER, 2020, 56 (12) : 3135 - 3146
  • [30] Experimental investigation of heat transfer characteristics and wall pressure distribution of swirling coaxial confined impinging air jets
    Markal, Burak
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 124 : 517 - 532
12345