Heat transfer distribution of impinging flame and air jets - A comparative study

被引:12
|
作者
Madam, Anil R. [1 ]
Tajik, Abdul Raouf [1 ]
Hindasageri, Vijaykumar [1 ]
机构
[1] Natl Inst Technol Karnataka, Dept Mech Engn, Surathkal, India
关键词
Scale analysis; CFD simulation; Jet impingement; Heat transfer; GAS; TEMPERATURE; FLUX;
D O I
10.1016/j.applthermaleng.2015.09.008
中图分类号
O414.1 [热力学];
学科分类号
摘要
Heat transfer distribution of impinging flame jet is compared with that of the impinging air jet based on the experimental data reported in literature for methane-air flame jet and air jet impingement for Reynolds number, Re=600-1400 and the non-dimensional nozzle tip to impingement plate distance, Z/d = 2-6. The comparative data based on mapping experimental data reported in literature suggest that there is a good agreement between the Nusselt numbers for higher Z/d near stagnation region. However, away from the stagnation region, the Nusselt number for flame jet is higher than that of air jet for similar operating conditions of Re and Z/d. A CFD simulation for impinging air jet and impinging flame jet is carried out to explain the physics and reason for the deviations observed in experimental data. A scale analysis is carried out to identify the dominant forces and their influence on the heat transfer distribution on the impingement plate. (C) 2015 Elsevier Ltd. All rights reserved.
引用
收藏
页码:42 / 49
页数:8
相关论文
共 50 条
  • [1] Heat transfer distribution for impinging methane-air premixed flame jets
    Hindasageri, Vijaykumar
    Vedula, Rajendra P.
    Prabhu, Siddini V.
    APPLIED THERMAL ENGINEERING, 2014, 73 (01) : 461 - 473
  • [2] Heat transfer distribution for three interacting methane-air premixed impinging flame jets
    Hindasageri, Vijaykumar
    Vedula, Rajendra P.
    Prabhu, Siddini V.
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2015, 88 : 914 - 925
  • [3] Heat transfer distribution of premixed methane-air laminar flame jets impinging on ribbed surfaces
    Kadam, Anil R.
    Parida, Ritesh Kumar
    Hindasageri, Vijaykumar
    Kumar, G. N.
    APPLIED THERMAL ENGINEERING, 2019, 163
  • [4] Heat transfer distribution and shadowgraph study for impinging underexpanded jets
    Vinze, Ravish
    Chandel, S.
    Limaye, M. D.
    Prabhu, S. V.
    APPLIED THERMAL ENGINEERING, 2017, 115 : 41 - 52
  • [5] Heat transfer of a row of three butane/air flame jets impinging on a flat plate
    Dong, LL
    Leung, CW
    Cheung, CS
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2003, 46 (01) : 113 - 125
  • [6] Heat transfer characteristics of a pair of impinging rectangular flame jets
    Dong, LL
    Leung, CW
    Cheung, CS
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2003, 125 (06): : 1140 - 1146
  • [7] HEAT-TRANSFER TO IMPINGING ISOTHERMAL GAS AND FLAME JETS
    VISKANTA, R
    EXPERIMENTAL THERMAL AND FLUID SCIENCE, 1993, 6 (02) : 111 - 134
  • [8] Heat transfer characteristics of three interacting methane/air flame jets impinging on a flat surface
    Chander, Subhash
    Ray, Anjan
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (3-4) : 640 - 653
  • [9] Heat transfer characteristics of slot and round premixed impinging flame jets
    Kwok, LC
    Leung, CW
    Cheung, CS
    EXPERIMENTAL HEAT TRANSFER, 2003, 16 (02) : 111 - 137
  • [10] Heat transfer characteristics of impinging two-dimensional flame jets
    Kwok, LC
    Cheung, CS
    Leung, CW
    COMBUSTION SCIENCE AND TECHNOLOGY IN ASIA-PACIFIC AREA: TODAY AND TOMORROW, 2003, : 60 - 63