Numerical investigation on the cooling of electronics components with synthetic multi-jets and non-sinusoidal bi-periodic forcing functions

被引：2

作者：

Benayad, Zouaoui ^{[1
]}

Laouedj, Samir ^{[1
]}

Filali, Abdelkader ^{[2
]}

机构：

[1] Djillali Liabes Univ Sidi Bel Abbes, Fac Technol, Mat & React Syst Lab, Sidi Bel Abbes, Algeria

[2] Imperial Coll London, Chem Engn Dept, London, England

来源：

ENERGY REPORTS | 2020年 / 6卷

关键词：

Heat transfer; Synthetic jet; (SST) K-omega turbulence model; Undulation heated wall; Nusselt number; Periodic signal; Bi-periodic signal; HEAT-TRANSFER CHARACTERISTICS; FLOW;

D O I：

10.1016/j.egyr.2019.10.011

中图分类号：

TE [石油、天然气工业]; TK [能源与动力工程];

学科分类号：

0807 ; 0820 ;

摘要：

Recently, the cooling process for electronics components has attracted many researchers and several techniques for improving the cooling efficiency and heat transfer rate have been demonstrated. One of the best efficient techniques is the introduction of a synthetic jet and the modification of heating surface. In the present study, the form of heating surface and the signal of the diaphragm has been modified to improve the synthetic jet. These modifications are novel and have been applied for the first time with very good thermal enhancement efficiency for microchannels with synthetic jets applications. This study allowed us to make a quantitative comparison between a basic case with a periodic signal and modified case with bi-periodic signal with two cavities having a slope of 3 degrees, 60 percent obstruction orifices and 10 mum of undulation heated wall. The unsteady flow and heat transfer for the two-dimensional synthetic jet are solved using ANSYS fluent code and k-omega (SST) model is selected to account for fluid turbulence. Obtained results showed an increase of Nusselt number by about 51% for the modified case compared with the basic case. (C) 2019 Published by Elsevier Ltd.

引用

页码：1 / 9

页数：9

共 21 条

[1] Simple synthetic jet actuators for cooling applications using soft or rigid magnets [J].

Buchberger, Gerda ;

Jakoby, Bernhard ;

Schoeftner, Juergen ;

Schuetzenberger, Andreas ;

Wiesmayr, Bianca ;

Baumgartner, Werner ;

Puttinger, Stefan ;

Brandl, Andreas ;

Hilber, Wolfgang .

PROCEEDINGS OF THE 30TH ANNIVERSARY EUROSENSORS CONFERENCE - EUROSENSORS 2016, 2016, 168 :1541-1546

[2] Heat transfer enhancement in microchannels with cross-flow synthetic jets [J].

Chandratilleke, T. T. ;

Jagannatha, D. ;

Narayanaswamy, R. .

INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2010, 49 (03) :504-513

[3] Convective heat transfer in circular and chevron impinging synthetic jets [J].

Crispo, Cuono Massimo ;

Greco, Carlo Salvatore ;

Cardone, Gennaro .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2018, 126 :969-979

[4]

Damora Rhakasywi Harinaldi, 2011, INT J ENG TECHNOL IJ, V11

[5] Heat transfer and flow characteristics of a pair of adjacent impinging synthetic jets [J].

Fanning, Eoin ;

Persoons, Tim ;

Murray, Darina B. .

INTERNATIONAL JOURNAL OF HEAT AND FLUID FLOW, 2015, 54 :153-166

[6] Influence of cavity shape on synthetic jet performance [J].

Feero, Mark A. ;

Lavoie, Philippe ;

Sullivan, Pierre E. .

SENSORS AND ACTUATORS A-PHYSICAL, 2015, 223 :1-10

[7] An investigation into flow and heat transfer for a slot impinging synthetic jet [J].

Ghaffari, Omidreza ;

Solovitz, Stephen A. ;

Arik, Mehmet .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 100 :634-645

[8] Local convective heat transfer from a constant heat flux flat plate cooled by synthetic air jets [J].

Gillespie, M. B. ;

Black, W. Z. ;

Rinehart, C. ;

Glezer, A. .

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2006, 128 (10) :990-1000

[9] Investigation of impinging single and twin circular synthetic jets flow field [J].

Greco, C. S. ;

Castrillo, G. ;

Crispo, C. M. ;

Astarita, T. ;

Cardone, G. .

EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2016, 74 :354-367

[10] Time and phase average heat transfer in single and twin circular synthetic impinging air jets [J].

Greco, Carlo Salvatore ;

Ianiro, Andrea ;

Cardone, Gennaro .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2014, 73 :776-788

← 1 2 3 →