共 30 条
A modelling approach to study the fouling of an anaerobic membrane bioreactor for industrial wastewater treatment
被引:56
作者:
Charfi, Amine
[1
]
Thongmak, Narumol
[2
,3
]
Benyahia, Boumediene
[4
]
Aslam, Muhammad
[1
]
Harmand, Jerome
[5
]
Ben Amar, Nihel
[6
]
Lesage, Geoffroy
[7
]
Sridang, Porntip
[3
,8
]
Kim, Jeonghwan
[1
]
Heran, Marc
[7
]
机构:
[1] Inha Univ, Dept Environm Engn, Namgu Yonghyun Dong 253, Incheon, South Korea
[2] Yala Rajabhat Univ, Fac Sci Technol & Agr, Environm Sci Program, Yala 95000, Thailand
[3] Ctr Excellence Hazardous Subst Management HSM, Bangkok 10330, Thailand
[4] Univ Tlemcen, Control Lab Tlemcen, BP 230, Tilimsen 13000, Algeria
[5] INRA, LBE, F-11100 Narbonne, France
[6] Univ Tunis El Manar, ENIT, Lab Modelisat Math & Numer Sci Ingn LAMSIN, Tunis, Tunisia
[7] Univ Montpellier, ENSCM, CNRS, IEM,UMR 5635, Pl Eugene Bataillon, F-34095 Montpellier 5, France
[8] Silpakorn Univ, Dept Environm Sci, Fac Sci, Muang 73000, Nakhon Pathom, Thailand
基金:
新加坡国家研究基金会;
关键词:
Anaerobic membrane bioreactor;
Modelling;
Membrane fouling;
Biogas production;
Deposit analysis;
SOLUBLE MICROBIAL PRODUCTS;
INTEGRATED MODEL;
ULTRAFILTRATION;
MECHANISMS;
DYNAMICS;
REMOVAL;
LATEX;
ANMBR;
D O I:
10.1016/j.biortech.2017.08.003
中图分类号:
S2 [农业工程];
学科分类号:
0828 ;
摘要:
An Anaerobic Membrane BioReactors (AnMBR) model is presented in this paper based on the combination of a simple fouling model and the Anaerobic Model 2b (AM2b) to describe biological and membrane dynamic responses in an AnMBR. In order to enhance the model calibration and validation, Trans-Membrane Pressure (TMP), Total Suspended Solid (TSS), COD, Volatile Fatty Acid (VFA) and methane production were measured. The model shows a satisfactory description of the experimental data with R-2 approximate to 0.9 for TMP data and R-2 approximate to 0.99 for biological parameters. This new model is also proposed as a numerical tool to predict the deposit mass composition of suspended solid and Soluble Microbial Products (SMP) on the membrane surface. The effect of SMP deposit on the TMP jump phenomenon is highlighted. This new approach offers interesting perspectives for fouling prediction and the on-line control of an AnMBR process.
引用
收藏
页码:207 / 215
页数:9
相关论文