Effects of the sintering temperature on the oxygen adsorption in ZnO ceramics

被引:19
|
作者
Castro, MS [1 ]
Aldao, CM [1 ]
机构
[1] Univ Mar del Plata, Inst Mat Sci & Technol, CONICET, INTEMA, RA-7600 Mar Del Plata, Argentina
关键词
sintering; grain boundaries; electrical conductivity; ZnO; sensors;
D O I
10.1016/S0955-2219(98)00210-6
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
Changes in electrical resistivity due to oxygen adsorption for samples prepared at different sintering temperature are presented. It was found that samples cooled in steps from the sintering temperature show a higher resistivity and that oxygen indiffusion is faster in quenched samples and in samples sintered at low temperatures. Two mechanisms were determined to be responsible for an increase in the sample resistivity. First, oxygen adsorption at grains surfaces produces a rapid increase in resistivity and then a slow change in the response due to oxygen diffusion into the grains. (C) 1999 Elsevier Science Limited. All rights reserved.
引用
收藏
页码:511 / 515
页数:5
相关论文
共 50 条
  • [31] Effects of Sintering Temperature on Crystallization Behavior and Performance of Glass Ceramics from Coal Fly Ash
    Peng, Tongjiang
    Cao, Chao
    Sun, Hongjuan
    PROCEEDINGS OF THE 11TH INTERNATIONAL CONGRESS FOR APPLIED MINERALOGY (ICAM), 2015, : 253 - 262
  • [32] Effects of Li2O on the low temperature sintering and thermal conductivity of AlN ceramics
    Qiao, L
    Zhou, HP
    Chen, KX
    Fu, RL
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2003, 23 (09) : 1517 - 1524
  • [33] LOW-TEMPERATURE SINTERING OF ZnO-Bi2O3-BASED VARISTOR CERAMICS FOR ENHANCED MICROSTRUCTURE DEVELOPMENT AND CURRENT-VOLTAGE CHARACTERISTICS
    Bernik, Slavko
    Cheng, Lihong
    Podlogar, Matejka
    Li, Guorong
    CERAMICS-SILIKATY, 2018, 62 (01) : 8 - 14
  • [34] EFFECTS OF OXYGEN CONTENT AND ROASTING TEMPERATURE ON THE SINTERING MINERALIZATION PROPERTIES OF DIFFERENT IRON ORES
    Mao, Xiaoming
    You, Zhixiong
    Zhang, Yuanbo
    Fan, Zhenyu
    Jiang, Tao
    4TH INTERNATIONAL SYMPOSIUM ON HIGH-TEMPERATURE METALLURGICAL PROCESSING, 2013, : 131 - 138
  • [35] Mn Distribution in ZnO:Mn Ceramics: Influence of Sintering Process and Thermal Annealing
    Markevich, I
    Vorona, I
    Nosenko, V
    Kolomys, O.
    Strelchuk, V
    Stara, T.
    Borkovska, L.
    Bondarenko, V
    Melnichuk, O.
    Melnichuk, L.
    Korsunska, N.
    ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY, 2020, 9 (10)
  • [36] Optimization of the composition and sintering conditions of high-voltage ZnO varistor ceramics
    O. G. Gromov
    Yu. A. Savel’ev
    E. L. Tikhomirova
    A. T. Belyaevskii
    E. P. Lokshin
    Inorganic Materials, 2017, 53 : 536 - 539
  • [37] Resistance and Wear Resistance Control in ZnO Substrates for Electrostatic Discharge-Safe Ceramics Through Variation of Sintering Temperature and Additives
    Kang, Jae Won
    Lee, Chang Hyun
    Shin, Hyo Soon
    Yeo, Dong Hun
    Jeong, Dae Yong
    NANOSCIENCE AND NANOTECHNOLOGY LETTERS, 2017, 9 (01) : 85 - 88
  • [38] Optimization of the composition and sintering conditions of high-voltage ZnO varistor ceramics
    Gromov, O. G.
    Savel'ev, Yu. A.
    Tikhomirova, E. L.
    Belyaevskii, A. T.
    Lokshin, E. P.
    INORGANIC MATERIALS, 2017, 53 (05) : 536 - 539
  • [39] Preparation and microwave dielectric properties of 3ZnO•B2O3 ceramics with low sintering temperature
    Hu, Yunxiang
    Wei, Dongmei
    Fu, Qiuyun
    Zhao, Jun
    Zhou, Dongxiang
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (03) : 521 - 524
  • [40] Effects of local Joule heating during the field assisted sintering of ionic ceramics
    Holland, Troy B.
    Anselmi-Tamburini, Umberto
    Quach, Dat V.
    Tran, Tien B.
    Mukherjee, Amiya K.
    JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2012, 32 (14) : 3667 - 3674