The effect of thermal and organic additive in morphology of ceramic based silicate

被引：0
|
作者：
Ginting, J. [1 ]
Bangun, N. [1 ]
Sembiring, H. Br [1 ]
Putri, N. K. [1 ]
机构：
[1] Univ Sumatera Utara, Fac Sci & Math, Medan, Indonesia
来源：
2ND INTERNATIONAL SYMPOSIUM ON FRONTIER OF APPLIED PHYSICS (ISFAP 2016) | 2017年 / 817卷
关键词：
ADSORPTION;
D O I：
10.1088/1742-6596/817/1/012023
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
M-Silicate (M = Mg, Ca) has been prepared by exchange metal reaction from M-Chloride salts and sodium silicate. The resulting white solid of chloride salts then heated at 700, 800, 900 and 1000 C-0. Due to increase the porosity of M-Silicate, 1,2-propanediol, oleic acid and glycerol were added, then formed M-silicates were heated at 800 C-0. Then, obtained white solid M-Silicates were characterized by Scanning Electron Microscopy (SEM). SEM images show the variance of surface morphology when the temperature increases. The addition of organic compounds is involved in surface modification.
引用
收藏
页数：6
相关论文
共 50 条
  • [31] Cellular morphology of organic-inorganic hybrid foams based on alkali alumino-silicate matrix
    Verdolotti, Letizia
    Liguori, Barbara
    Capasso, Ilaria
    Caputo, Domenico
    Lavorgna, Marino
    Iannace, Salvatore
    TIMES OF POLYMERS (TOP) AND COMPOSITES 2014, 2014, 1599 : 226 - 229
  • [32] Effect of a Feed Additive Based on Organic Growth Promoter for Broiler Chickens
    Mazzero, L.
    Andrade, J. M. M.
    Moreira Jr, H.
    Valvano, I. M.
    Menten, J. F. M.
    BRAZILIAN JOURNAL OF POULTRY SCIENCE, 2023, 25 (02)
  • [33] Effect of plasticizer on the fabrication and properties of alumina ceramic by stereolithography-based additive manufacturing
    Xing, Zhanwen
    Liu, Weiwei
    Chen, Yao
    Li, Wenli
    CERAMICS INTERNATIONAL, 2018, 44 (16) : 19939 - 19944
  • [34] Additive Effect on Lithium Silicate Pellets for Thermochemical Energy Storage
    Takasu, Hiroki
    Nihei, Takuya
    Kim, Seon Tae
    Kato, Yukitaka
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2021, 54 (05) : 195 - 200
  • [35] Effect of an Aluminosilicate Disperse Additive on Behaviors of Autoclave Silicate Materials
    Nelubova, Viktoriya
    Strokova, Valeria
    Fediuk, Roman
    Amran, Mugahed
    Vatin, Nikolai
    Vasilev, Yuriy
    BUILDINGS, 2021, 11 (06)
  • [36] Microscopy and quantitative morphology of aluminum silicate nanoparticles grown on organic templates
    Kang, BW
    Crosta, GF
    Stenhouse, PJ
    Sung, CM
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2005, 5 (02) : 334 - 345
  • [37] Investigation of Thermal Instability of Additive-Based High-Efficiency Organic Photovoltaics
    Yao, En-Ping
    Tsai, Yi-Jhe
    Hsu, Wei-Chou
    INTERNATIONAL JOURNAL OF PHOTOENERGY, 2014, 2014
  • [38] Use of Magnesium Silicate Contaminated with Organic Compounds in Ceramic Materials as a Pore Modifier
    Pranckeviciene, Jolanta
    Pundiene, Ina
    MATERIALS, 2022, 15 (24)
  • [39] Influence of organic additives on the degree of grinding of raw material for magnesial silicate ceramic
    K. G. Zemlyanoi
    N. A. Moskovskikh
    Refractories and Industrial Ceramics, 2012, 53 : 181 - 184
  • [40] Influence of organic additives on the degree of grinding of raw material for magnesial silicate ceramic
    Zemlyanoi, K. G.
    Moskovskikh, N. A.
    REFRACTORIES AND INDUSTRIAL CERAMICS, 2012, 53 (03) : 181 - 184
12345