Optimization of vacuum casting process parameters using Taguchi method

被引：0

作者：

Ahmad, Mohd Nazri ^{[1
,3
]}

Alkahari, Mohd Rizal ^{[2
]}

Basir, Mohamad Faris Mohd ^{[1
]}

Maidin, Nurul Ain ^{[1
,3
]}

Wahid, Mohammad Khalid ^{[1
,3
]}

Ab Rahman, Mohd Hidayat ^{[1
,3
]}

Osman, Mohd Hairizal ^{[1
,3
]}

机构：

[1] Univ Tekn Malaysia Melaka, Fac Engn Technol, Durian Tunggal 76100, Melaka, Malaysia

[2] Univ Tekn Malaysia Melaka, Fac Mech Engn, Durian Tunggal 76100, Melaka, Malaysia

[3] Univ Tekn Malaysia Melaka, Adv Mfg Ctr Energy, Durian Tunggal 76100, Melaka, Malaysia

来源：

PROCEEDINGS OF MECHANICAL ENGINEERING RESEARCH DAY 2018 (MERD) | 2018年

关键词：

Taguchi method; vacuum casting; shrinkage; S/N ratio;

D O I：

暂无

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This paper investigates the optimization of vacuum casting process by using Taguchi method. In order to optimize these 3 parameters which are resin temperature, mould temperature and vacuum pressure time, the L '9 orthogonal array was used. From the results, it shows that the optimum parameters that can minimize the shrinkage are resin temperature (30 degrees C), mould temperature (60 degrees C) and vacuum pressure time (5 min.). The study demonstrates that better dimensional accuracy of vacuum casting process can be optimized using Taguchi method.

引用

页码：146 / 147

页数：2