Summary of the PISC round robin results on wrought and cast austenitic steel weldments .3. Cast-to-cast capability study

Within the framework of Action 4 of the third phase of the Programme for the Inspection of Steel Components (PISC III), three capability studies on stainless steel welds have been conducted. The first capability study used a series of six wrought-to-wrought stainless steel assemblies that contained a number of flaws such as intergranular stress corrosion cracks, mechanical and thermal fatigue cracks and PISC type A flaws. The second capability study used two wrought-to-cast austenitic steel assemblies that contained lack of fusion flaws and PISC type A flaws. The third capability study used three cast-to-cast austenitic steel assemblies that contained lack of fusion flaws, mechanical fatigue cracks and PISC type A flaws. In total, more than 25 teams from 10 different countries participated. A lot of information was obtained on the performance of the inspection techniques used with respect to detection, false calls, depth and length sizing. Different flaw categories were considered to identify those difficult to detect. Furthermore, an analysis at the level of techniques was performed which identified some of the more effective techniques and procedures. In Part III of this work the main conclusion from the capability study on cast-to-cast austenitic steel welds will be discussed. The two other capability studies are discussed in Parts I and II. Copyright (C) 1996 Elsevier Science Ltd.