Effect of Granulated Blast Furnace Slag and fly ash addition on the strength properties of lightweight mortars containing waste PET aggregates

被引:76
作者
Akcaozoglu, Semiha [1 ]
Atis, Cengiz Duran [2 ,3 ]
机构
[1] Nigde Univ, Fac Architecture, Dept Architecture, TR-51100 Nigde, Turkey
[2] Erciyes Univ, Fac Engn, Dept Civil Engn, TR-38039 Kayseri, Turkey
[3] Abdullah Gul Univ, Engn & Architecture Fac, Dept Civil Engn, Kayseri, Turkey
关键词
PET; Granulated Blast Furnace Slag; Fly ash; Waste PET aggregate; Lightweight aggregate; Strength properties; COMPRESSIVE STRENGTH; POLYETHYLENE TEREPHTHALATE; FINE AGGREGATE; PLASTIC WASTE; CONCRETE; BOTTLES; CEMENT; REPLACEMENT; DURABILITY; SHRINKAGE;
D O I
10.1016/j.conbuildmat.2011.04.042
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In this work, the effect of Granulated Blast Furnace Slag (GBFS) and fly ash (FA) addition on the strength properties of lightweight mortars containing waste Poly-ethylene Terephthalate (PET) bottle aggregates was investigated. Investigation was carried out on three groups of mortar specimens. One made with only Normal Portland cement (NPC) as binder, second made with NPC and GBFS together and, third made with NPC and FA together. The industrial wastes mentioned above were used as the replacement of cement on mass basis at the replacement ratio of 50%. The size of shredded PET granules used as aggregate for the preparation of mortar mixtures were between 0 and 4 mm. The waste lightweight PET aggregate (WPLA)-binder ratio (WPLA/b) was 0.60; the water-binder (w/b) ratios were determined as 0.45 and 0.50. The dry unit weight, compressive and flexural-tensile strengths, carbonation depths and drying shrinkage values were measured and presented. The results have shown that modifying GBFS had positive effects on the compressive strength and drying shrinkage values (after 90 days) of the WPLA mortars. However, FA substitution decreased compressive and flexural-tensile strengths and increased carbonation depths. Nevertheless a visible reduction occurred on the drying shrinkage values of FA modifying specimens more than cement specimens and GBFS modified specimens. The test results indicated that, GBFS has a potential of using as the replacement of cement on the WPLA mortars by taking into consideration the characteristics. But using FA as a binder at the replacement ratio of 50% did not improve the overall strength properties. Although it was thought that, using FA as binder at the replacement ratio of 50% for the aim of production WPLA concrete which has a specific strength, would provide advantages of economical and ecological aspects. (C) 2011 Elsevier Ltd. All rights reserved.
引用
收藏
页码:4052 / 4058
页数:7
相关论文
共 43 条
[1]   An investigation on the use of shredded waste PET bottles as aggregate in lightweight concrete [J].
Akcaozoglu, Semiha ;
Atis, Cengiz Duran ;
Akcaozoglu, Kubilay .
WASTE MANAGEMENT, 2010, 30 (02) :285-290
[2]   Influence of content and particle size of waste pet bottles on concrete behavior at different w/c ratios [J].
Albano, C. ;
Camacho, N. ;
Hernandez, M. ;
Matheus, A. ;
Gutierrez, A. .
WASTE MANAGEMENT, 2009, 29 (10) :2707-2716
[3]  
[Anonymous], 1994, C989 ASTM
[4]  
[Anonymous], 2019, Standard specification for steel, sheet, carbon, structural, and high-strength, low-alloy, hot-rolled and cold-rolled
[5]  
[Anonymous], 2005, C157 ASTM
[6]  
Anwar M., 2006, HBRC J, V2, P7
[7]   Strength properties of high-volume fly ash roller compacted and workable concrete, and influence of curing condition [J].
Atis, CD .
CEMENT AND CONCRETE RESEARCH, 2005, 35 (06) :1112-1121
[8]   Strength and shrinkage properties of mortar containing a nonstandard high-calcium fly ash [J].
Atis, CD ;
Kiliç, A ;
Sevim, UK .
CEMENT AND CONCRETE RESEARCH, 2004, 34 (01) :99-102
[9]   High volume fly ash abrasion resistant concrete [J].
Atis, CD .
JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2002, 14 (03) :274-277
[10]  
ATIS CD, 2002, INT C ADV CIV ENG AC, P161