Crevice corrosion behaviors of CoCrMo alloy and stainless steel 316L artificial joint materials in physiological saline

被引：23

作者：

Huang, Xin ^{[1
]}

Zhou, Ke ^{[1
]}

Ye, Qizhe ^{[1
]}

Wang, Zening ^{[1
]}

Qiao, Lijie ^{[1
]}

Su, Yanjing ^{[1
]}

Yan, Yu ^{[1
]}

机构：

[1] Univ Sci & Technol Beijing, Beijing Adv Innovat Ctr Mat Genome Engn, Corros & Protect Ctr, Inst Adv Mat & Technol, Beijing 100083, Peoples R China

来源：

CORROSION SCIENCE | 2022年 / 197卷

基金：

中国国家自然科学基金;

关键词：

Artificial joint; 316L stainless steel; CoCrMo alloy; Crevice corrosion; N80; CARBON-STEEL; FRETTING-CORROSION; TEMPERATURE; INITIATION;

D O I：

10.1016/j.corsci.2021.110075

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Crevices of artificial joints can become occluded and are prone to severe corrosion. Different crevice width was controlled to reveal its effect to corrosion for two commonly used alloys (316L stainless steel and CoCrMo alloy). The results show that 316L stainless steel with the narrowest (0.05 mm) width corrodes more easily and more severely. There is no typical crevice corrosion for CoCrMo alloy, and the exterior of the crevice has different degrees of corrosion due to the mass transfer effect caused by the crevice with different widths. The corrosion rate reaches the lowest value when the width is 0.1 mm.

引用

页数：10

共 45 条

[1]

Abdulsalam MI, 1999, CORROS SCI, V41, P351, DOI 10.1016/S0010-938X(98)00103-6

[2] Critical conditions for pit initiation and growth of austenitic stainless steels [J].

Al Ameri, M. ;

Yi, Y. ;

Cho, P. ;

Al Saadi, S. ;

Jang, C. ;

Beeley, P. .

CORROSION SCIENCE, 2015, 92 :209-216

[3] IR voltage switch in delayed crevice corrosion and active peak formation detected using a repassivation-type scan [J].

Al-Zahrania, AM ;

Pickering, HW .

ELECTROCHIMICA ACTA, 2005, 50 (16-17) :3420-3435

[4] Localized corrosion and mitigation approach of steel materials used in oil and gas pipelines - An overview [J].

Alamri, Aeshah H. .

ENGINEERING FAILURE ANALYSIS, 2020, 116

[5] The production and properties of wrought high carbon Co-Cr-Mo alloys [J].

Berry, G ;

Bolton, JD ;

Brown, JB ;

McQuaide, S .

COBALT-BASE ALLOYS FOR BIOMEDICAL APPLICATIONS, 1999, 1365 :11-31

[6] Outcome of Re-Revision Surgery for Adverse Local Tissue Reaction in Metal-on-Polyethylene and Metal-on-Metal Total Hip Arthroplasty [J].

Bonner, Bryant ;

Arauz, Paul ;

Klemt, Christian ;

Kwon, Young-Min .

JOURNAL OF ARTHROPLASTY, 2020, 35 (06) :S284-S288

[7] Initiation modeling of crevice corrosion in 316L stainless steels [J].

Chang, HY ;

Park, YS ;

Hwang, WS .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 103 (02) :206-217

[8] Experimental design to study the influence of temperature, pH, and chloride concentration on the pitting and crevice corrosion of UNS S30403 stainless steel [J].

Dastgerdi, Arash Azimi ;

Brenna, Andrea ;

Ormellese, Marco ;

Pedeferri, MariaPia ;

Bolzoni, Fabio .

CORROSION SCIENCE, 2019, 159

[9] Pitting behavior of SLM 316L stainless steel exposed to chloride environments with different aggressiveness: Pitting mechanism induced by gas pores [J].

Duan, Zhiwei ;

Man, Cheng ;

Dong, Chaofang ;

Cui, Zhongyu ;

Kong, Decheng ;

Wang, Li ;

Wang, Xin .

CORROSION SCIENCE, 2020, 167

[10] Corrosion of Metallic Biomaterials: A Review [J].

Eliaz, Noam .

MATERIALS, 2019, 12 (03)

← 1 2 3 4 5 →