Soda-lime glass as a binder in reusable experimental investment for dental castings

被引:2
作者
Yagi, Satoshi [1 ]
Zhang, Zutai [1 ,2 ]
Aida, Yoshiteru [1 ]
Hotta, Yasuhiro [1 ]
Tamaki, Yukimichi [1 ]
Miyazaki, Takashi [1 ]
机构
[1] Showa Univ, Sch Dent, Dept Oral Biomat & Technol, Shinagawa Ku, Tokyo 1428555, Japan
[2] Capital Med Univ, Capital Univ Med Sci Beijing Stomatol Hosp, Fac Stomatol, Beijing Inst Dent Res, Beijing 100050, Peoples R China
关键词
Investment; Reuse; Glass; Cast; PHOSPHATE;
D O I
10.4012/dmj.2011-040
中图分类号
R78 [口腔科学];
学科分类号
1003 ;
摘要
In this study, different glasses were investigated to improve reusable investments. Borosilicate glass (BSG) powder and soda-lime glass (SLG) powder were prepared by milling broken beakers and microscope slides, respectively, and used in experimental investments (I-BSG, I-SLG) by blending glass powder (10wt%) with cristobalite (90wt%). Some properties and casting fits were evaluated with commercial gypsum-bonded investment as the control. Both BSG and SLG were mainly composed of Si, but SW had a large Ca content. The glass transition temperatures were approximately 800 degrees C (BSG) and 700 degrees C (SLG). Experimental investments with heating showed the significantly (p<0.05) higher expansion than that of the control. The compressive strength of I-SLG was higher than that of I-BSG, and increased with temperature. The MOD inlay obtained from I-SLG had a significantly smaller gap than that from I-BSG, and was comparable to the control. These results suggest SLG could be applied clinically as a reusable dental investment.
引用
收藏
页码:611 / 615
页数:5
相关论文
共 11 条
  • [1] Aida Y, 2009, DENT MED RES, V29, P139
  • [2] Anusavice KennethJ., 1996, Phillip's science of dental materials, V10th, P583
  • [3] ANUSAVISE KJ, 1996, PHILLIPS SCI DENT MA, P484
  • [4] FUJIOKA S, 2004, J OSAKA DENT U, V67, P13
  • [5] Hattori M, 2001, Dent Mater J, V20, P16
  • [6] Khamis E, 1995, Int Dent J, V45, P209
  • [7] Reisbick M H, 1995, Int J Prosthodont, V8, P346
  • [8] CASTING PURE TITANIUM INTO COMMERCIAL PHOSPHATE-BONDED SIO2 INVESTMENT MOLDS
    TAKAHASHI, J
    KIMURA, H
    LAUTENSCHLAGER, EP
    LIN, JHC
    MOSER, JB
    GREENER, EH
    [J]. JOURNAL OF DENTAL RESEARCH, 1990, 69 (12) : 1800 - 1805
  • [9] METAL CERAMIC BOND AFTER MULTIPLE CASTINGS OF BASE METAL ALLOY
    Ucar, Yurdanur
    Aksahin, Zafer
    Kurtoglu, Cem
    [J]. JOURNAL OF PROSTHETIC DENTISTRY, 2009, 102 (03) : 165 - 171
  • [10] Recycling of used commercial phosphate-bonded investments with additional mono-ammonium phosphate
    Zhang, ZT
    Tamaki, Y
    Hotta, Y
    Miyazaki, T
    [J]. DENTAL MATERIALS JOURNAL, 2005, 24 (01) : 14 - 18