Low-temperature, direct synthesis of β-SiC by metal vapor vacuum arc ion source implantation

被引:2
|
作者
Liu, ZQ [1 ]
Liu, JF [1 ]
Feng, JY [1 ]
Li, WZ [1 ]
机构
[1] Tsing Hua Univ, Dept Mat Sci & Engn, State Key Lab Tribol, Beijing 100084, Peoples R China
基金
中国国家自然科学基金;
关键词
beta silicon carbide; SiC synthesis; ion implantation;
D O I
10.1016/S0167-577X(01)00239-7
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Crystalline beta -SiC surface layers with strong (111) preferred orientation were synthesized by direct ion implantation into Si(111) substrates at a low temperature of 400 degreesC using a metal vapor vacuum are ion source. Both X-ray diffraction and Fourier transform infrared spectroscopy reveal an augment in the amount of beta -SiC with increasing implantation doses at 400 degreesC. Scanning electron microscopy shows the formation of an almost continuous SiC surface layer after implantation at 400 degreesC with a dose of 7 x 10(17)/cm(2). The full width at half maximum of the X-ray rocking curve of beta -SiC(111) was measured to be 1.4 degrees for the sample implanted at a dose of 2 x 10(17)/cm(2) at 700 degreesC, revealing a good alignment of beta -SiC with the Si matrix. (C) 2001 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:275 / 278
页数:4
相关论文
共 50 条
  • [31] Ion beam synthesized cobalt germanide alloy by metal vapor vacuum arc implantation
    Lee, CS
    Wilson, IH
    Cheung, WY
    Chen, YJ
    Xu, JB
    Wong, SP
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1999, 148 (1-4): : 604 - 609
  • [32] Formation of copper silicides by high dose metal vapor vacuum arc ion implantation
    Rong, C
    Zhang, JH
    Li, WZ
    APPLIED SURFACE SCIENCE, 2003, 220 (1-4) : 40 - 45
  • [33] Composition, structure and optical properties of SiC buried layer formed by high dose carbon implantation into Si using metal vapor vacuum arc ion source
    Chen, DH
    Wong, SP
    Yang, SH
    Mo, D
    THIN SOLID FILMS, 2003, 426 (1-2) : 1 - 7
  • [34] Decrease of Ceramic Surface Resistance by Implantation Using a Vacuum Arc Metal Ion Source
    Savkin, K. P.
    Bugaev, A. S.
    Nikolaev, A. G.
    Oks, E. M.
    Kurzina, I. A.
    Shandrikov, M. V.
    Yushkov, G. Yu.
    Brown, I. G.
    25TH INTERNATIONAL SYMPOSIUM ON DISCHARGES AND ELECTRICAL INSULATION IN VACUUM (ISDEIV 2012), 2012, : 554 - 557
  • [35] Two approaches to electron beam enhancement of the metal vapor vacuum arc ion source
    Johnson, BM
    Hershcovitch, A
    Bugaev, AS
    Gushenets, VI
    Oks, EM
    Yushkov, GY
    Batalin, VA
    Kolomiets, AA
    Kuibeda, RP
    Kulevoy, TV
    Pershin, VI
    Petrenko, SV
    Seleznev, DN
    LASER AND PARTICLE BEAMS, 2003, 21 (01) : 103 - 108
  • [36] METAL VAPOR VACUUM-ARC SOURCE ION-IMPLANTATION AS A SURFACE-TREATMENT TECHNIQUE FOR INDUSTRIAL TOOL BITS
    LIN, WL
    DING, XJ
    ZHANG, HX
    SANG, JM
    XU, J
    WANG, ZY
    SURFACE & COATINGS TECHNOLOGY, 1992, 51 (1-3): : 534 - 539
  • [37] Advanced vacuum arc metal ion implantation systems
    Treglio, JR
    Elkind, A
    Stinner, RJ
    Perry, AJ
    SURFACE & COATINGS TECHNOLOGY, 1997, 96 (01): : 1 - 8
  • [38] Formation of Zr-disilicide by high-current Zr ion implantation into Si using metal vapor vacuum arc ion source
    Gao, KY
    Zhu, HN
    Liu, BX
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1998, 140 (1-2): : 129 - 136
  • [39] Spectroscopic ellipsometry studies of buried CoSi2 layers in Si formed by ion implantation with a metal vapor vacuum arc ion source
    Guo, WS
    THIN SOLID FILMS, 2000, 375 (1-2) : 280 - 283
  • [40] METAL VAPOR VACUUM-ARC ION-IMPLANTATION FOR SEEDING OF ELECTROLESS CU PLATING
    QIAN, XY
    KIANG, MH
    CHEUNG, NW
    BROWN, IG
    GODECHOT, X
    GALVIN, JE
    MACGILL, RA
    YU, KM
    NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, 1991, 55 (1-4): : 893 - 897