Phosphorus-induced mobilization of colloids: model systems and soils

Increasing the phosphorus (P) saturation of sandy soils may cause an increase in the rate of transport of dissolved P to groundwater. We hypothesize that by increasing sorption of P, soil colloids such as iron (Fe) oxides are also mobilized, because the adsorption of P causes the surface charge to become more negative, which increases the repulsive forces between the colloids and the sand grains, and between the colloids in suspension. Goethite particles adsorbed to fine quartz sand and precipitated goethite coatings on coarse quartz sand were used as model systems to test this hypothesis. Soil samples from a Cambisol Bw horizon and a Gleysol Bg horizon were also investigated. We conducted a series of batch experiments with increasing concentrations of ortho-P and inositol hexaphosphate (IHP). The adsorption of P and the dispersion of colloids were determined by measuring P, Fe, aluminium and carbon concentrations in supernatants before and after ultracentrifugation. Dispersed colloids were characterized according to their optical density, zeta potential and particle size. The addition of P caused mobilization of goethite and soil colloids when a critical P saturation, corresponding to a zeta potential of about -20 mV, was exceeded. To induce colloid mobilization in soils, one to two orders of magnitude larger equilibrium concentrations of dissolved P were necessary, compared with those required for the model systems. The adsorption of IHP reduced the zeta potential of colloids more effectively than the adsorption of ortho-P per mol P. Environmentally significant concentrations of colloidal P (> 0.1 mg P litre(-1)) were released from soil samples at equilibrium concentrations of dissolved P < 0.1 mg P litre(-1). We conclude that the sorption and accumulation of P in sandy subsoils that might occur as a result of excessive fertilization might induce the mobilization of colloids and colloidal P.