Study of broad bandwidth vibrational energy harvesting system with optimum thickness of PET substrate

In this paper, we present the development of a flexible PET-based (polyethylene terephthalate; PET) vibrational energy harvesting system with broad bandwidth. This broad bandwidth harvesting system comprises of four units of individual ZnO (zinc oxide) piezoelectric harvester in the form of a cantilever structure connected in parallel, and rectifying circuit with storage module. This system has ability to convert mechanical energy into electrical energy from the varying ambient vibration. The design and simulation of a piezoelectric cantilever plate was described by using commercial software ANSYS FEA (Finite Element Analysis) to determine the optimum thickness of PET substrate, internal stress distribution, operation frequency and electric potential. With the optimum thickness predicted by developed accurate analytical formula analysis, the one-way mechanical strain that is efficient to enhance the induced electric potential can be controlled within the piezoelectric ZnO layer. In addition, the relationship among the model solution of piezoelectric cantilever plate equation, vibration-induced electric potential and electric power was realized. An individual piezoelectric harvester consists of flexible PET substrate, piezoelectric ZnO thin film with (002) c-axis preferred orientation, and selectively deposited UV-curable resin lump structure which is used to change the resonant frequency of the harvester. In combination with multi-harvesters and rectifying with storage module together, an energy harvesting system with broad bandwidth can be fabricated. One individual harvester achieves a maximum OCV (open-circuit voltage) up to 4 V with power density of 1.247 mu W/cm(3). So far, we succeeded in accomplishing a broad bandwidth system with operating frequency range within 100 Hz-450 Hz to enhance powering efficiency. When the DC voltage (direct current voltage) across a storage module is charged up to 1.55 V after rectification, a flash LED (light emitting diode) is driven. (C) 2011 Elsevier B. V. All rights reserved.