Mechanical properties of 3D-woven composites with guide sleeves

被引：3

作者：

Wu, Xiaochuan ^{[1
,2
]}

Shan, Zhongde ^{[1
]}

Liu, Feng ^{[1
]}

Wang, Yuan ^{[1
]}

机构：

[1] State Key Lab Adv Forming Technol & Equipment Chi, Beijing 100083, Peoples R China

[2] Univ Sci & Technol, Engn Res Inst, Beijing, Peoples R China

来源：

JOURNAL OF COMPOSITE MATERIALS | 2020年 / 54卷 / 12期

关键词：

3D Woven composites; guide sleeve; short-beam shear; compression;

D O I：

10.1177/0021998316636461

中图分类号：

TB33 [复合材料];

学科分类号：

摘要：

In this study, the preforms of 3D woven composite materials were made by a flexible oriented 3D composite woven process. The vacuum-assisted resin infusion (VARI) process was used to impregnate the preforms. The short-beam shear test, the compression test, and SEM were used to investigate the interlaminar shear performance and the compression behavior of the 3D woven composite with guide sleeves, and the effect of the guide sleeves on the above properties. It is indicated that the interlaminar shear behavior of 3D woven composites with guide sleeves showed the typical fracture characteristics of a pseudoplastic material. And the fracture modes of interlaminar shear mainly include interlaminar shear fracture and tensile fracture of fibers at the bottom. The interlaminar shear strength of materials increased with the diameter and interval of guide sleeves decreasing. Furthermore, the loss of in-plane compression properties of the materials brought by guide sleeves could be effectively avoided by reasonable control of the diameter and the volume fracture of guide sleeves.

引用

页码：1571 / 1578

页数：8

共 12 条

[1]

[Anonymous], D23442000 ASTM

[2] Modeling strategies of 3D woven composites: A review [J].

Ansar, Mahmood ;

Wang Xinwei ;

Zhou Chouwei .

COMPOSITE STRUCTURES, 2011, 93 (08) :1947-1963

[3] Future structural stability design for composite space and airframe structures [J].

Degenhardt, Richard ;

Castro, Saullo G. P. ;

Arbelo, Mariano A. ;

Zimmerman, Rolf ;

Khakimova, Regina ;

Kling, Alexander .

THIN-WALLED STRUCTURES, 2014, 81 :29-38

[4] The production of tough, electrically conductive carbon fiber composite laminates for use in airframes [J].

Guo, Miaocai ;

Yi, Xiaosu .

CARBON, 2013, 58 :241-244

[5] Fabrication and erosion studies of C-SiC composite Jet Vanes in solid rocket motor exhaust [J].

Kumar, Suresh ;

Kumar, Anil ;

Sampath, K. ;

Prasad, V. V. Bhanu ;

Chaudhary, J. C. ;

Gupta, A. K. ;

Devi, G. Rohini .

JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2011, 31 (13) :2425-2431

[6]

Li-Jun H, 2004, NEW CARBON MATER, V19, P97

[7] Review of z-pinned composite laminates [J].

Mouritz, A. P. .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 2007, 38 (12) :2383-2397

[8] Compression properties of z-pinned composite laminates [J].

Mouritz, A. P. .

COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (15-16) :3110-3120

[9] Review of applications for advanced three-dimensional fibre textile composites [J].

Mouritz, AP ;

Bannister, MK ;

Falzon, PJ ;

Leong, KH .

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, 1999, 30 (12) :1445-1461

[10]

Shan Z, 2011, P INT C ADV TECHN DE

← 1 2 →