Effect of chemical structure on the hydrolytic stability of lubricating base oils

被引:21
|
作者
Beran, Elzbieta [1 ]
机构
[1] Wroclaw Univ Technol, Fac Chem, Div Fuels Chem & Technol, PL-50344 Wroclaw, Poland
关键词
Base oil; Hydrolytic degradation; Mineral oils; Synthetics; BIODEGRADABILITY; ADDITIVES;
D O I
10.1016/j.triboint.2010.09.001
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Base oils differing in chemical structure, representatives of hydrocarbon fluids, ester fluids, and water-insoluble polyallcylene glycols (PAGs), were tested (ASTM D2619) for comparison of their hydrolytic stability, which was found to depend on both their chemical structure and purity. The variations observed after hydrolytic degradation in oil acid numbers, water layer acidity, and copper (Cu) strip weight are indicative of excellent hydrolytic stability of hydrocarbon oils, very good hydrolytic stability of PAG oils, and good hydrolytic stability of polyolester oils (characterized by high purity and an acid number lower than 0.1 mg KOH/g). The positive effect of steric hindrance around the ester bonds on the hydrolytic stability of polyolesters was substantiated by the results obtained for the oils of a pentaerythrite tetracaproate and pentaerythrite tetra(sec-caproate) structure. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2372 / 2377
页数:6
相关论文
共 50 条
  • [1] Experience with evaluating biodegradability of lubricating base oils
    Beran, Elzbieta
    TRIBOLOGY INTERNATIONAL, 2008, 41 (12) : 1212 - 1218
  • [2] The New Test Procedure for Group-Type Composition of Base Oils of Lubricating Oils, Especially Emitted into the Environment
    Nowak, Paulina
    Kucharska, Karolina
    Kaminski, Marian Antoni
    ENERGIES, 2020, 13 (15)
  • [3] Anilinosilanes as thermo-oxidation stabilizers of commercial lubricating base oils
    ElQurashi, MAM
    Ali, HM
    THERMOCHIMICA ACTA, 1997, 293 (1-2) : 185 - 190
  • [4] Interaction of Chloroprene and Nitrile-Butadiene Rubber with Lubricating Greases and Base Oils
    Gunnar Stang
    Linda Salomonsson
    Boris Zhmud
    润滑油, 2006, (03) : 54 - 60
  • [5] Applications and research trends of high performance synthetic base oils for lubricating greases
    Onuki, Yuji
    JOURNAL OF JAPANESE SOCIETY OF TRIBOLOGISTS, 2007, 52 (04) : 273 - 278
  • [6] VISCOSITY BUILDING BY POLYMERS AND SHEAR STABILITY OF POLYMER FORTIFIED LUBRICATING OILS
    HARDY, BJ
    SWARTZ, CJ
    TRIBOLOGY TRANSACTIONS, 1992, 35 (01): : 199 - 203
  • [7] Effect of high-pressure rheology of lubricating oils on boundary lubrication
    Mia, Sobahan
    Morita, Shigeki
    Ohno, Nobuyoshi
    TRIBOLOGY INTERNATIONAL, 2011, 44 (06) : 751 - 755
  • [8] Separation and determination of the group-type composition of modern base and lubricating oils with a wide range of polarity, especially emitted to the environment
    Dygula, Paulina
    Kucharska, Karolina
    Kami, Marian
    JOURNAL OF CHROMATOGRAPHY B-ANALYTICAL TECHNOLOGIES IN THE BIOMEDICAL AND LIFE SCIENCES, 2022, 1192
  • [9] The influence of high temperature oxidation on molecular structure and performance of aviation base oils
    Ma, Jun
    Fei, Yiwei
    Wu, Nan
    Sun, Shian
    Wang, Yuelun
    ASIA-PACIFIC JOURNAL OF CHEMICAL ENGINEERING, 2019, 14 (01)
  • [10] Insights into the effect of imidazolium-based ionic liquids on chemical structure and hydrolytic activity of microbial lipase
    Martins Nascimento, Paloma Andrade
    Brandao Pereira, Jorge Fernando
    Santos-Ebinuma, Valeria de Carvalho
    BIOPROCESS AND BIOSYSTEMS ENGINEERING, 2019, 42 (07) : 1235 - 1246