Defect structures in zirconium diboride powder prepared by self-propagating high-temperature synthesis

被引：77

作者：

Mishra, SK ^{[1
]}

Das, S ^{[1
]}

Pathak, LC ^{[1
]}

机构：

[1] Natl Met Lab, MTC Div, Jamshedpur 831007, Bihar, India

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2004年 / 364卷 / 1-2期

关键词：

defects; ZrB2; transmission electron microscopy; SHS; powder synthesis (solid state);

D O I：

10.1016/j.msea.2003.08.021

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A comparative study on the defect structures in zirconium diboride (ZrB2) powder prepared by three different techniques namely a self-propagating high-temperature synthesis (SHS), a replacement reaction process (RRP) and a carbothermic reduction process (CRP) was carried out. It was established that the powder prepared by SHS process has more defect structures due to strongly higher rate of heating and cooling during processing than the powders produced by the replacement reaction and carbothermic reduction techniques. The SHS produced ZrB2 powders had shown better sinterability compared to the powders prepared by the other techniques. This behavior was attributed to the higher defect concentration in the SHS produced ZrB2 powders. (C) 2003 Elsevier B.V. All rights reserved.

引用

页码：249 / 255

页数：7

共 14 条

[1]

BERMANN OR, 1966, J AM CERAM SOC, V49, P502

[2] Synthesis and analysis of ZrB2-based composites [J].

Cheng, YM ;

Gadalla, AM .

MATERIALS AND MANUFACTURING PROCESSES, 1996, 11 (04) :575-587

[3]

Einarsrud MA, 1997, J AM CERAM SOC, V80, P3013, DOI 10.1111/j.1151-2916.1997.tb03227.x

[4] SHS COMBUSTION CHARACTERISTICS OF SEVERAL CERAMICS AND INTERMETALLIC COMPOUNDS [J].

MAKINO, A ;

LAW, CK .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1994, 77 (03) :778-786

[5] Synthesis of zirconium diboride-alumina composite by the self-propagating, high-temperature synthesis process [J].

Mishra, SK ;

Das, SK ;

Ramachandrarao, P ;

Belov, DY ;

Mamyan, S .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2003, 34A (09) :1979-1983

[6]

MISHRA SK, 2002, J MATER RES, V17, P2814

[7]

Munir Z.A., 1993, REV PARTICUL MATER, V1, P41

[8] REACTION SYNTHESIS PROCESSES - MECHANISMS AND CHARACTERISTICS [J].

MUNIR, ZA .

METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1992, 23 (01) :7-13

[9] Sintering studies on ultrafine ZrB2 powder produced by a self-propagating high-temperature synthesis process [J].

Pathak, SKM ;

Das, S ;

Das, SK ;

Ramachandrarao, P .

JOURNAL OF MATERIALS RESEARCH, 2000, 15 (11) :2499-2504

[10]

Rainer T., 1994, STRUCTURE PROPERTIES, V11, P173

← 1 2 →