Development of a dielectric barrier discharge (DBD) cryo-microplasma: generation and diagnostics

We developed a cryo-microplasma, which can continuously control gas temperature below room temperature and below the freezing point of water. To develop the cryo-microplasma, we first developed an atmospheric-pressure low-temperature microplasma that can suppress the increase in its gas temperature. Helium gas was employed, which was generated in open air. The average estimated electron density and temperature were 10(8)-10(9) cm(-3) and 4-5 eV, respectively, independent of the applied voltage. Then, helium gas, which was the working gas of the atmospheric-pressure low-temperature microplasma, was cooled by liquid nitrogen to generate an atmospheric-pressure cryo-microplasma in open air. We observed the generation of frost around the quartz tube in which the plasma was generated and an increase in atomic oxygen emission by optical emission spectroscopy. Finally, to avoid the generation of frost, a cryo-microplasma was generated in a reactor chamber separated from open air. Helium, nitrogen and oxygen were employed as working gases. Using thermocouples and by estimation from the nitrogen rotational temperature, we verified that the gas temperature of the cryo-microplasma was much lower (T(g)approximate to 180- 300 K) than that of the conventional atmospheric-pressure low-temperature plasma ( above 300 K).