The thermal behavior of CMAS-infiltrated thermal barrier coatings

被引：56

作者：

Kakuda, Tyler R. ^{[1
]}

Levi, Carlos G. ^{[1
,2
]}

Bennett, Ted D. ^{[1
]}

机构：

[1] Univ Calif Santa Barbara, Dept Mech Engn, Santa Barbara, CA 93106 USA

[2] Univ Calif Santa Barbara, Dept Mat, Santa Barbara, CA 93106 USA

来源：

SURFACE & COATINGS TECHNOLOGY | 2015年 / 272卷

关键词：

Calcium-magnesium alumino-silicates (CMAS); Thermal barrier coatings (TBCs); Thermal properties; NICKEL-ALUMINIDE COATINGS; RUMPLING MECHANISM; DEPOSITS; DELAMINATION; CONDUCTIVITY; TEMPERATURE; ZIRCONIA;

D O I：

10.1016/j.surfcoat.2015.03.043

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Understanding the mechanisms by which the durability and functionality of thermal barrier coatings (TBCs) are compromised by the infiltration of molten calcium-magnesium alumino-silicates (CMAS) requires an assessment of the effects on the thermal and mechanical properties of the coating. This study focuses on quantifying the effect of CMAS on the thermal properties and heat transport in TBCs. The thermal properties of a 7 wt.% yttria-stabilized zirconia (7YSZ) TBC deposited on a superalloy substrate by air plasma spray CAPS) were measured before and after CMAS infiltration. A rise in both volumetric heat capacity and thermal conductivity of the coating was observed upon infiltration. Calculations to explain these trends were performed for a model TBC system and found to be in good agreement with the measured results. The evolution of the phase constitution of the coating was analyzed by Raman spectroscopy and the integrity of the interface was characterized by optical examination of cross sections. These tests determined that the coating remained in good contact with the substrate and experienced no phase change after infiltration. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：350 / 356

页数：7

共 37 条

[1]

An K, 1999, J AM CERAM SOC, V82, P399

[2]

[Anonymous], J AM CERAM SOC

[3] Novel thermal barrier coatings that are resistant to high-temperature attack by glassy deposits [J].

Aygun, Aysegul ;

Vasiliev, Alexander L. ;

Padture, Nitin P. ;

Ma, Xinqing .

ACTA MATERIALIA, 2007, 55 (20) :6734-6745

[4]

Barin I., 1973, Thermochemical Properties of Inorganic Substances

[5] Front surface thermal property measurements of air plasma spray coatings [J].

Bennett, Ted ;

Kakuda, Tyler ;

Kulkarni, Anand .

JOURNAL OF APPLIED PHYSICS, 2009, 105 (08)

[6] Role of environmental deposits and operating surface temperature in spallation of air plasma sprayed thermal barrier coatings [J].

Borom, MP ;

Johnson, CA ;

Peluso, LA .

SURFACE & COATINGS TECHNOLOGY, 1996, 86 (1-3) :116-126

[7] High-density YSZ tapes fabricated via the multi-folding lamination process [J].

Capdevila, X. G. ;

Folch, J. ;

Calleja, A. ;

Llorens, J. ;

Segarra, M. ;

Espiell, F. ;

Morante, J. R. .

CERAMICS INTERNATIONAL, 2009, 35 (03) :1219-1226

[8] Microstructural characterization of porous thermal barrier coatings by laser flash technique [J].

Cernuschi, F. ;

Bison, P. ;

Moscatelli, A. .

ACTA MATERIALIA, 2009, 57 (12) :3460-3471

[9] THEORY OF THERMAL-CONDUCTIVITY OF COMPOSITE-MATERIALS [J].

CHEN, FC ;

CHOY, CL ;

YOUNG, K .

JOURNAL OF PHYSICS D-APPLIED PHYSICS, 1977, 10 (04) :571-586

[10] Effect of sintering on mechanical properties of plasma-sprayed zirconia-based thermal barrier coatings [J].

Choi, SR ;

Zhu, DM ;

Miller, RA .

JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2005, 88 (10) :2859-2867

← 1 2 3 4 →