MoM/BI-RME Method for the Modeling of Frequency Selective Surfaces and Printed Circuits

被引：0
|
作者：
Bozzi, Maurizio [1 ]
Pasian, Marco [1 ]
Perregrini, Luca [1 ]
机构：
[1] Univ Pavia, Dept Elect Comp & Biomed Engn, I-27100 Pavia, Italy
来源：
2014 INTERNATIONAL CONFERENCE ON NUMERICAL ELECTROMAGNETIC MODELING AND OPTIMIZATION FOR RF, MICROWAVE, AND TERAHERTZ APPLICATIONS (NEMO) | 2014年
关键词：
Frequency selective surfaces; printed microwave circuits; Method of Moments; DESIGN;
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
This paper outline the basic theory and describes the most significant applications of the MoM/BI-RME method for the modeling of planar periodic structures and printed circuits. The MoM/BI-RME method is based on the solution of an integral equation by the Method of Moments (MoM) with entire-domain basis functions. In the case of arbitrarily shaped domains, the basis functions are calculated numerically by the Boundary Integral-Resonant Mode Expansion (BI-RME) method. The MoM/BI-RME method has been applied to the modeling of a variety of structures, including frequency selective surfaces, reflectarrays, shielded microwave printed circuits, and electromagnetic band-gap structures. An outline of the major applications is reported in this paper.
引用
收藏
页数：4
相关论文
共 36 条
  • [21] Analysis of inductive frequency selective surfaces by the method of moments with entire-domain basis functions
    Don, Nataliya
    Bozzi, Maurizio
    Kirilenko, Anatoly
    Perregrini, Luca
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2007, 49 (12) : 2929 - 2932
  • [22] Large Overlapping Subdomain Method of Moments for the Analysis of Frequency Selective Surfaces
    Fallahi, Arya
    Yahaghi, Alireza
    Abiri, Habibollah
    Shahabadi, Mahmoud
    Hafner, Christian
    IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES, 2010, 58 (08) : 2175 - 2187
  • [23] Analysis of shorted ring slots Frequency Selective Surfaces using WCIP method
    Dé partement d'é lectronique, Centre Universitaire Bordj, Bou-Arré ridj, 34000, Algeria
    不详
    不详
    不详
    J. Microwaves Optoelectron., 2008, 2 (65-82):
  • [24] Synthesis of frequency selective surfaces using genetic algorithm combined with the equivalent circuit method
    Campos, A. L. P. S.
    Martins, A. M.
    Almeida Filho, V. A.
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2012, 54 (08) : 1893 - 1897
  • [25] Plane wave scattering from frequency-selective surfaces by the finite-element method
    Bardi, I
    Remski, R
    Perry, D
    Cendes, Z
    IEEE TRANSACTIONS ON MAGNETICS, 2002, 38 (02) : 641 - 644
  • [26] Inkjet-printed frequency-selective surfaces based on carbon nanotubes for ultra-wideband thin microwave absorbers
    Jaiswar, R.
    Mederos-Henry, F.
    Dupont, V
    Hermans, S.
    Raskin, J-P
    Huynen, I
    JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS, 2020, 31 (03) : 2190 - 2201
  • [27] Numerical convergence in periodic method of moments analysis of frequency-selective surfaces based on wire elements
    Blackburn, J
    Arnaut, LR
    IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2005, 53 (10) : 3308 - 3315
  • [28] Full-wave analysis of dielectric frequency-selective surfaces using a vectorial modal method
    Coves, A
    Gimeno, B
    Gil, J
    Andrés, MV
    San Blas, AA
    Boria, VE
    IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 2004, 52 (08) : 2091 - 2099
  • [29] Accurate Modeling of Frequency Selective Surfaces Using Fully-Connected Regression Model With Automated Architecture Determination and Parameter Selection Based on Bayesian Optimization
    Calik, Nurullah
    Belen, Mehmet Ali
    Mahouti, Peyman
    Koziel, Slawomir
    IEEE ACCESS, 2021, 9 (09): : 38396 - 38410
  • [30] Compact Modeling of Interconnect Circuits over Wide Frequency Band by Adaptive Complex-Valued Sampling Method
    Wang, Hai
    Tan, Sheldon X. -D.
    Rakib, Ryan
    ACM TRANSACTIONS ON DESIGN AUTOMATION OF ELECTRONIC SYSTEMS, 2012, 17 (01)
1234