Microstructure characterizations of hypereutectic Al-Si alloys with different undercooling levels

被引：1
|
作者：
Kang, HS
Yoon, WY
Kim, KH
Kim, MH
Yoon, EP
机构：
[1] Korea Univ, Div Mat Sci & Engn, Seoul 136701, South Korea
[2] Korea Univ, Dept Mech Engn, Seoul 136701, South Korea
[3] Inha Univ, Sch Mat Sci & Engn, Inchon 402751, South Korea
[4] Hanyang Univ, Div Mat Sci & Engn, Seoul 133791, South Korea
来源：
DESIGNING, PROCESSING AND PROPERTIES OF ADVANCED ENGINEERING MATERIALS, PTS 1 AND 2 | 2004年 / 449-4卷
关键词：
hypereutectic Al-Si; undercooling; morphological changes of primary and eutectic Si;
D O I：
10.4028/www.scientific.net/MSF.449-452.169
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
Microstructural variation is quantitatively characterized by measured undercooling. For near-eutectic Al-13wt%Si alloys, microstructure transitions, which include a phase change from eutectic to primary alphaAl dendrite plus eutectic and a morphological change from alpha-Al dendrite to equiaxed Al grains, were observed with increasing undercooling levels. For hypereutectic Al-Si alloys, microstructure transitions, which include a morphological change of primary and eutectic Si crystals, were also obtained quantitatively by increasing undercooling.
引用
收藏
页码：169 / 172
页数：4
相关论文
共 50 条
  • [1] Microstructure selections in the undercooled hypereutectic Al-Si alloys
    Kang, HS
    Yoon, WY
    Kim, KH
    Kim, MH
    Yoon, YP
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 404 (1-2): : 117 - 123
  • [2] IMPROVEMENT OF MICROSTRUCTURE IN HYPEREUTECTIC AL-SI ALLOYS BY RHEOCASTING
    ICHIKAWA, K
    ISHIZUKA, S
    TRANSACTIONS OF THE JAPAN INSTITUTE OF METALS, 1987, 28 (05): : 434 - 444
  • [3] Effect of Ce on the viscosity and microstructure of hypereutectic Al-Si alloys
    Geng, HX
    Geng, HR
    Xue, XY
    Sun, MH
    Bian, XF
    Zhao, P
    RARE METAL MATERIALS AND ENGINEERING, 2003, 32 (06) : 471 - 474
  • [4] Improved hypereutectic Al-Si cast alloys:: Microstructure and properties
    Müller, K
    ADVANCED LIGHT ALLOYS AND COMPOSITES, 1998, 59 : 233 - 241
  • [5] Influence of microstructure on mechanical properties of hypereutectic Al-Si alloys
    CEIT and ESII, San Sebastian, Spain
    Key Eng Mat, Pt 2 (911-918):
  • [6] Influence of microstructure on mechanical properties of hypereutectic Al-Si alloys
    Goni, JV
    RodriguezIbabe, JM
    Urcola, JJ
    CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2, 1997, 127-3 : 911 - 918
  • [7] On solidification of hypereutectic Al-Si alloys
    B. Korojy
    H. Fredriksson
    Transactions of the Indian Institute of Metals, 2009, 62 : 361 - 365
  • [8] On solidification of hypereutectic Al-Si alloys
    Korojy, B.
    Fredriksson, H.
    TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 2009, 62 (4-5): : 361 - 365
  • [9] VISCOUS-FLOW AND MICROSTRUCTURE OF HYPEREUTECTIC AL-SI ALLOYS BY RHEOCASTING
    ICHIKAWA, K
    ISHIZUKA, S
    JOURNAL OF THE JAPAN INSTITUTE OF METALS, 1986, 50 (04) : 416 - 422
  • [10] Spray forming of hypereutectic Al-Si alloys
    Cui, C.
    Schulz, A.
    Schimanski, K.
    Zoch, H. -W.
    JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (11) : 5220 - 5228
12345