Modification of hydroxyapatite coating in the presence of adipic acid for Mg-based implant application

This study investigated the role of adipic acid (AA) in improving the anti-corrosion performance and in-vitro bioactivity of hydroxyapatite coating applied on AZ31 Mg alloy. Firstly, hydroxyapatite (HA) coating was applied on the AZ31 Mg alloy. In the next step, the optimized hydroxyapatite-based coating, modified with adipic acid by direct addition and post-treatment methods. Corrosion behavior of uncoated sample and different coated samples were studied by Electrochemical Impedance Spectroscopy (EIS) and Direct Current (DC) Polarization techniques. Surface characterization was examined by Field Emission Scanning Electron Microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDXS), X-ray diffraction (XRD) and contact angle measurements. According to the contact angle results, all coated samples reveal high hydrophilic behavior. Additionally, the XRD analysis confirms the formation of hydroxyapatite crystals in all coated samples and the presence of the AA in HA + AA and HA - AA coatings does not change the crystal structure of the hydroxyapatite. Electrochemical studies display that the Rp value of HA coating is increased from 3630 omega.cm2 to 10784 omega.cm2 by the direct addition method also by the post-treatment method the polarization resistance reached 10294 omega.cm2. In addition, an in-vitro bioactivity assessment was performed in a simulated body fluid (SBF). Based on FE-SEM studies, a protective layer of AA is formed on HA coating by the post-treatment method which improves the anticorrosion behavior efficiently. The results showed that the adipic acid-modified hydroxyapatite coatings by direct addition and post-treating methods display better anti-corrosion properties and bioactivity compared to the optimal hydroxyapatite coating.