Axial capacity of CFS built-up columns comprising of lipped channels with spacers: Nonlinear response and design

This paper deals with the numerical investigation aimed to study the axial capacity and the nonlinear deformation response of pin ended cold-formed steel (CFS) built-up columns under monotonic axial loading, applied concentrically. The built-up sections were constructed by adequately spaced channel sections in a back-toback configuration, connected through webs by means of connecting elements (CFS channels) called spacers. Self-driving screws were used as fasteners to assemble together the lipped channels and spacers. Finite element (FE) models were established and verified against the previously published built-up columns with similar configuration. An extensive parametric study was conducted by varying the key parameters like plate slenderness of the lipped channels, unbraced chord slenderness, and global slenderness in order to investigate their variation on the ultimate compression resistance of these built-up columns. The effective width method was used to determine the design strengths for these built-up columns using the AS/NZ Specifications and European Specification on cold-formed steel structures, which were later compared with the results obtained from the numerical parametric study. This study indicated that the provisions that are given in the current AS/NZS and European Specification in predicting the strengths of the built-up column with spacers had shortcomings. Therefore, new design equations for the reliable design strength predictions of the CFS built-up column composed of lipped channels with spacers were proposed. The incorporation of spacers curtailed the local buckling half-wave length, which improved the buckling resistance, predominantly in the columns failing by local buckling.