Environmental impacts of distributed energy systems - The case of micro cogeneration

Distributed generation in micro cogeneration systems, e.g. reciprocating or Stirling engines and fuel cells, is of increasing interest in the energy market. This paper investigates environmental impacts of micro cogeneration by carrying out a detailed life cycle assessment and an analysis of local air quality impacts of micro cogeneration systems. Most micro cogeneration systems are superior, as far as the reduction of GHG emissions is concerned, not only to average electricity and heat supply, but also to state-of-the art separate production of electricity in gas power plants and heat in condensing boilers. The GHG advantages of micro cogeneration plants are comparable to district heating with CHP. Under the assumption that gas condensing boilers are the competing heat-supply technology, all technologies are within a very narrow range. Looking at the GHG reduction potential on the level of a supply object (e.g. a single-family house) by modeling the operation with a CHP optimization tool, the achievable mitigation potential is somewhat lower, because the micro cogeneration systems do not supply the whole energy demand. Here, fuel cells offer the advantage of a higher power-to-heat ratio. Environmental impacts other than those related to climate and resource protection relate more specifically to technology. in addition to investigating the emissions side, analysis of the air quality situation of a residential area supplied by reciprocating engines was carried out. The analysis shows that for the selected conditions, the additional emission of NO, due to the engines do not create severe additional environmental impacts. (c) 2007 Elsevier Ltd. All rights reserved.