Exact analytical solution of unsteady axi-symmetric conductive heat transfer in cylindrical orthotropic composite laminates

被引:55
作者
Delouei, A. Amiri [1 ]
Kayhani, M. H. [1 ]
Norouzi, M. [1 ]
机构
[1] Shahrood Univ Technol, Dept Mech Engn, Shahrood, Iran
关键词
Analytical solution; Cylindrical composite laminate; Unsteady heat conduction; Laplace transformation; Meromorphic function method; THERMAL BARRIER COATINGS; FINITE-ELEMENT; MATRIX COMPOSITES; FRICTION; FRACTURE; MEDIA; SHOCK;
D O I
10.1016/j.ijheatmasstransfer.2012.04.012
中图分类号
O414.1 [热力学];
学科分类号
摘要
This study presents an exact analytical solution of transient heat conduction in cylindrical multilayer composite laminates. This solution is valid for the most generalized linear boundary conditions consisting of the conduction, convection and radiation heat transfer. Here, it is supposed that the fibers are winded around the cylinder and their direction can be changed in each lamina. Laplace transformation is applied to change the domain of the solutions from time into the frequency. An appropriate Fourier transformation has been derived using the Sturm-Liouville theorem. Here, a set of equations for Fourier coefficients are obtained based on the boundary conditions both inside and outside the cylinder, and the continuity of temperature and heat flux at boundaries between adjacent layers. The exact solution of this set of equations is obtained using Thomas algorithm and Fourier coefficients are expressed by recessive relations. Due to the difficulty of applying the inverse Laplace transformation, the Meromorphic function method is utilized to find the transient temperature distribution in laminate. Some industrial examples are presented to investigate the ability of current solution for solving the wide range of applied steady and unsteady problems. (C) 2012 Elsevier Ltd. All rights reserved.
引用
收藏
页码:4427 / 4436
页数:10
相关论文
共 45 条
[1]  
A-zisik M.N., 1993, Heat conduction
[2]   A methodology to reduce thermal gradients due to the exothermic reactions in composites processing [J].
Antonucci, V ;
Giordano, M ;
Hsiao, KT ;
Advani, SG .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2002, 45 (08) :1675-1684
[3]  
Arpaci V.S., 1996, Conduction Heat Transfer
[4]   Orthotropic thermal conductivity effect on cylindrical pin fin heat transfer [J].
Bahadur, Raj ;
Bar-Cohen, Avram .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (5-6) :1155-1162
[5]   Analysis of multi-layered filament-wound composite pipes under combined internal pressure and thermomechanical loading with thermal variations [J].
Bakaiyan, H. ;
Hosseini, H. ;
Ameri, E. .
COMPOSITE STRUCTURES, 2009, 88 (04) :532-541
[6]   Finite element modeling of polymer curing in natural fiber reinforced composites [J].
Behzad, T. ;
Sain, M. .
COMPOSITES SCIENCE AND TECHNOLOGY, 2007, 67 (7-8) :1666-1673
[7]   Heat transfer through woven textiles [J].
Bhattacharjee, Debarati ;
Kothari, V. K. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2009, 52 (7-8) :2155-2160
[8]   A constrained discrete layer model for heat conduction in laminated composites [J].
Blanc, M ;
Touratier, M .
COMPUTERS & STRUCTURES, 2005, 83 (21-22) :1705-1718
[9]  
Bronshtein I.N., 1998, HDB MATH, Vthird
[10]   Temperature distribution in a thin composite plate exposed to a concentrated heat source [J].
Corlay, C. ;
Advani, S. G. .
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2007, 50 (15-16) :2883-2894