Low-temperature purification process of metallurgical silicon

The removal of B and P consumes most of heat energy in Si metallurgical purification process for solar-grade Si. Metal-liquating purification of metallurgical grade silicon (MG-Si), also called Si-recrystallization from metal liquid, was a potential energy-saving method for the removal of B and P efficiently, since Si could be melted at lower temperature by alloying with metal. The selection criteria of metal-liquating system was elaborated, and Al, Sn and In were selected out as the optimum metallic mediums. For Sn-Si system, the segregation coefficient of B decreased to 0.038 at 1 500 K, which was much less than 0.8 at the melting point of Si. The mass fraction of B was diminished from 15x10(-6) to 0.1x10(-6) as MG-Si was purified by twice, while that of most metallic elements could be decreased to 0.1x10(-6) by purifying just once. During the metal-liquating process, the formation of compounds between impurity elements and Si was also an important route of impurity removal. Finally, one low-temperature metallurgical process based on metal-liquating method was proposed.