Axial-Field Synchronous Machine With HTS Armature Windings: Realization and Preliminary Tests

被引:8
|
作者
Statra, Yazid [1 ,2 ]
Menana, Hocine [1 ]
Douine, Bruno [1 ]
Lubin, Thierry [1 ]
机构
[1] Univ Lorraine, GREEN, F-54000 Nancy, France
[2] UER ELT, Ecole Mil Polytech, Algiers 16111, Algeria
关键词
High-temperature superconductors; Coils; Rotors; Current measurement; Windings; Superconducting magnets; Mathematical models; Axial-field synchronous machine; BSCCO tape; HTS armature windings; permanent magnet rotor; GENERATOR;
D O I
10.1109/TASC.2022.3145321
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The realization and preliminary tests of a high temperature superconducting axial-field synchronous machine (HTS-AFSM) prototype are presented in this paper. The HTS machine consists of a 3-phase stator with HTS armature winding and a permanent magnet (PM) rotor. The HTS armature winding contains three pancake coils made of BSCCO tape forming a single layer nonoverlapping concentrated stator windings. The rotor is composed of four NdFeB permanent magnets. Several tests have been carried out such as voltage vs. currents curves of the HTS coils, static torque, back-EMF and load tests in generator mode. A 3D semi-analytical model, based on integral equations, has been used to check out the measured electromagnetic quantities. It has been shown that the measured and the calculated quantities are in satisfactory agreement.
引用
收藏
页数:5
相关论文
共 50 条
  • [1] Design of an axial flux inductor type synchronous motor with the liquid nitrogen cooled field and armature HTS windings
    Sugimoto, Hidehiko
    Tsuda, Teppei
    Morishita, Takaya
    Hondou, Yoshinori
    Takeda, Toshio
    Togawa, Hiroyuki
    Oota, Tomoya
    Ohmatsu, Kazuya
    Yoshida, Shigeru
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 1571 - 1574
  • [2] A Multipole Synchronous Machine With Nonoverlapping Concentrated Armature and Field Windings on the Stator
    Fukami, Tadashi
    Matsuura, Yoshitaka
    Shima, Kazuo
    Momiyama, Masatoshi
    Kawamura, Mitsuhiro
    IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2012, 59 (06) : 2583 - 2591
  • [3] Study of a new axial-field superconducting inductor for a synchronous machine
    Douar, Hakim
    Hadjout, Larbi
    El Hadj, Ailam
    Douine, Bruno
    INTERNATIONAL JOURNAL OF APPLIED ELECTROMAGNETICS AND MECHANICS, 2022, 69 (02) : 233 - 244
  • [4] Development of an axial flux type PM synchronous motor with the liquid nitrogen cooled HTS armature windings
    Sugimoto, Hidehiko
    Tsuda, Teppei
    Morishita, Takaya
    Hondou, Yoshinori
    Takeda, Toshio
    Togawa, Hiroyuki
    Oota, Tomoya
    Ohmatsu, Kazuya
    Yoshida, Shigeru
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2007, 17 (02) : 1637 - 1640
  • [5] Double armature HTS bulk synchronous machine
    Takei, S.
    Izumi, M.
    Yamaguchi, K.
    Ida, T.
    Shaanika, E.
    33RD INTERNATIONAL SYMPOSIUM ON SUPERCONDUCTIVITY (ISS2020), 2021, 1975
  • [6] Fabrication and test of an axial-field HTS rotating machine with integrated magnetic coupling
    Dolisy, B.
    Mezani, S.
    Lubin, T.
    Leveque, J.
    SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2017, 30 (03):
  • [7] Design and Analysis of a New HTS Axial-Field Flux-Switching Machine
    Wang, Yubin
    Chen, Mu
    Ching, T. W.
    Chau, K. T.
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2015, 25 (03)
  • [8] Design of a 10 MVA Fully HTS Synchronous Generator With Dual Field Windings and 4 Poles Spanned Armature Windings
    Lee, Myeonghee
    Yoon, Miyeon
    Park, Sang Ho
    Kim, Woo-Seok
    Lee, Ji-kwang
    Choi, Kyeongdal
    IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY, 2021, 31 (05)
  • [9] Development and test of an axial flux type PM synchronous motor with liquid nitrogen cooled HTS armature windings
    Sugimoto, H.
    Morishita, T.
    Tsuda, T.
    Takeda, T.
    Togawa, H.
    Oota, T.
    Ohmatsu, K.
    Yoshida, S.
    8TH EUROPEAN CONFERENCE ON APPLIED SUPERCONDUCTIVITY (EUCAS'07), 2008, 97
  • [10] Axial-field synchronous machine with homopolar flux in the airgap for a flywheel accumulator
    Bernard, N
    Ben Ahmed, H
    Multon, B
    CONFERENCE RECORD OF THE 2002 IEEE INDUSTRY APPLICATIONS CONFERENCE, VOLS 1-4, 2002, : 1258 - 1265