Study of Paper Transverse Shrinkage During Thermal Drying

被引：7

作者：

Zerrouati, Ali ^{[1
,2
]}

Rueff, Martine ^{[3
,4
,5
]}

Bouchekima, Bachir ^{[1
,2
]}

机构：

[1] Univ Kasdi Merbah, Lab New & Renewable Energy Dev Arid & Saharan Zon, Ouargla 30000, Algeria

[2] Univ Hadj Lakhdar, Fac Technol, Dept Mech, Batna, Algeria

[3] Univ Grenoble Alpes, LGP2, Grenoble, France

[4] CNRS, LGP2, Grenoble, France

[5] Agefpi, LGP2, Grenoble, France

来源：

DRYING TECHNOLOGY | 2015年 / 33卷 / 10期

关键词：

Laboratory paper; Thermal drying; Transverse shrinkage; MOISTURE; POROSITY;

D O I：

10.1080/07373937.2015.1018995

中图分类号：

TQ [化学工业];

学科分类号：

0817 ;

摘要：

The z-direction shrinkage of laboratory papers made of bleached softwood kraft pulp subjected to drying was studied. The results showed that shrinkage was dependent on the beating level of the pulp and independent of wet pressing in the range explored. The low-basis-weight sheets had greater specific volumes than the higher-basis-weight ones due to the greater relative importance of the superficial layers compared to the bulk, but their transverse shrinkage was smaller.Empirical correlations were proposed to model the thickness results as a function of moisture content for their interest in computational simulation of drying including shrinkage.

引用

页码：1170 / 1179

页数：10

共 25 条

[1]

Baggerud E., 2003, P 2003 INT PHYS C VI

[2]

Baggerud E., 2004, THESIS LUND U LUND

[3]

Balazs T., 1982, INT CHEM ENG, V22, P744

[4]

Batchelor WJ, 2004, APPITA J, V57, P107

[5]

Corte H., 1957, T 1 FUND RES S FUND

[6]

He JH, 2003, TAPPI J, V2, P27

[7]

International Organization for Standardization(ISO), 1979, 526411979E ISO

[8]

International Organization for Standardization(ISO), 2005, 526912005E ISO

[9]

ISO, 2004, ISO 5269-2:2004(E) PulpsPreparation of Laboratory Sheets for Physical TestingPart 2: Rapid-Kothen Method

[10] A review of drying models including shrinkage effects [J].

Katekawa, ME ;

Silva, MA .

DRYING TECHNOLOGY, 2006, 24 (01) :5-20

← 1 2 3 →