Composition segregation in semi-solid metal cast AA7075 aluminium alloy

被引:31
作者
George, S. L. [1 ]
Knutsen, R. D. [1 ]
机构
[1] Univ Cape Town, Dept Mech Engn, Ctr Mat Engn, ZA-7701 Rondebosch, South Africa
基金
新加坡国家研究基金会;
关键词
SOLIDIFICATION BEHAVIOR; ZN; EVOLUTION;
D O I
10.1007/s10853-012-6340-3
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
The composition distribution and microstructural evolution associated with the characteristic globular grain structure in semi-solid metal cast AA7075 aluminium alloy has been investigated. The primary globular grains possess uniform composition over nearly 90% of their diameter with fluctuations only occurring in the near surface of the individual grains. The inter-globular regions are solute rich and contain non-equilibrium eutectic. The segregation pattern in semi-solid cast structures occurs over a much greater length-scale than the dendritic pattern prevalent in conventional castings and it is proposed that the distinction arises from predominant planar growth of the a-primary globular grains during the SSM conditioning stage. Examination of the in-grain structure using electron backscattered diffraction revealed a quasi-periodic fluctuation in misorientation that may have arisen from local perturbations on the planar solid interface as solidification progressed. Homogenisation prior to artificial ageing is severely compromised by the undesirable segregation pattern.
引用
收藏
页码:4716 / 4725
页数:10
相关论文
共 22 条
[1]  
Bruwer R., 2008, U.S. Patent, Patent No. [7,368,690, 7368690]
[2]   Thixoforming 7075 aluminium alloys [J].
Chayong, S ;
Atkinson, HV ;
Kapranos, P .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2005, 390 (1-2) :3-12
[3]   The improvement of constituent dissolution and mechanical properties of 7055 aluminum alloy by stepped heat treatments [J].
Chen, KH ;
Liu, HW ;
Zhang, Z ;
Li, S ;
Todd, RI .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2003, 142 (01) :190-196
[4]   Semi-solid near-net shape rheocasting of heat treatable wrought aluminum alloys [J].
Curle, U. A. .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2010, 20 (09) :1719-1724
[5]   Influence of copper addition on precipitation kinetics and hardening in Al-Zn-Mg alloy [J].
Deschamps, A ;
Bréchet, Y ;
Livet, F .
MATERIALS SCIENCE AND TECHNOLOGY, 1999, 15 (09) :993-1000
[6]   MICROSTRUCTURE OF STIR-CAST METALS [J].
DOHERTY, RD ;
LEE, HI ;
FEEST, EA .
MATERIALS SCIENCE AND ENGINEERING, 1984, 65 (01) :181-189
[7]   In situ observations of stress-induced defect formation at the solid-liquid interface [J].
Fabietti, LM ;
Trivedi, R .
JOURNAL OF CRYSTAL GROWTH, 1997, 173 (3-4) :503-512
[8]   The microstructural evolution of an Al-Zn-Mg-Cu alloy during homogenization [J].
Fan, XG ;
Jiang, DM ;
Meng, QC ;
Zhong, L .
MATERIALS LETTERS, 2006, 60 (12) :1475-1479
[9]  
Fan XG, 2006, T NONFERR METAL SOC, V16, P577, DOI 10.1016/S1003-6326(06)60101-5
[10]   Solidification behaviour of AZ91D alloy under intensive forced convection in the RDC process [J].
Fan, Z ;
Liu, G .
ACTA MATERIALIA, 2005, 53 (16) :4345-4357