Optimisation of electrospinning parameter for Poly(L-lactic) acid (PLLA) electrospun nanofiber

被引：2
|
作者：
Sawawi, Marini [1 ]
Sahari, S. K. [1 ]
Kuan, Nicholas [1 ]
Yusof, Mahshuri [1 ]
Andew, Magdalene [1 ]
Salleh, S. F. [1 ]
Sapawi, Rohana [1 ]
机构：
[1] Univ Malaysia Sarawak, Fac Engn, Kota Samarahan 94300, Malaysia
来源：
9TH INTERNATIONAL UNIMAS STEM ENGINEERING CONFERENCE (ENCON 2016) INNOVATIVE SOLUTIONS FOR ENGINEERING AND TECHNOLOGY CHALLENGES | 2017年 / 87卷
关键词：
CELLULAR-RESPONSE; FIBERS; FABRICATION; SCAFFOLDS;
D O I：
10.1051/matecconf/20178702012
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
Poly (L-lactic) Acid (PLLA) is one of the biodegradable polymer that normally used in the biomedical application. In this work it is shown that electrospinning of PLLA electrospun fibre was affected by electrospinning processing parameters such as the solvent systems selection, polymer solution concentration, flow rate and acceleratingvoltage. Optimisation of these parameters is necessary to obtain a beadless and submicron diameter fibre as desired in this research.
引用
收藏
页数：5
相关论文
共 50 条
  • [1] Preparation and characterization of electrospun poly(ε-caprolactone)-poly(l-lactic acid) nanofiber tubes
    Khatri, Zeeshan
    Nakashima, Ryu
    Mayakrishnan, Gopiraman
    Lee, Ki-Hoon
    Park, Young-Hwan
    Wei, Kai
    Kim, Ick-Soo
    JOURNAL OF MATERIALS SCIENCE, 2013, 48 (10) : 3659 - 3664
  • [2] The dyeability of poly(L-lactic acid) nonwoven fabric fabricated by electrospinning
    Yu Qiaozhen
    PROCEEDINGS OF 2009 INTERNATIONAL CONFERENCE ON ADVANCED FIBERS AND POLYMER MATERIALS, VOLS 1 AND 2, 2009, : 1241 - 1243
  • [3] Development of poly(L-lactic acid) (PLLA) biocomposites with waste wood
    Bitencourt, Schaiane Silveira
    Batista, Ketlin Cristina
    Zattera, Ademir Jose
    Kasper Silva, Denise Abatti
    Testa Pezzin, Ana Paula
    MATERIA-RIO DE JANEIRO, 2017, 22 (04):
  • [4] Electrospun Biodegradable Poly(L-lactic acid) Nanofiber Membranes as Highly Porous Oil Sorbent Nanomaterials
    Yang, Jizhen
    Li, Fan
    Lu, Guibin
    Lu, Yuanbin
    Song, Chuanbo
    Zhou, Rong
    Wu, Shaohua
    NANOMATERIALS, 2022, 12 (15)
  • [5] Bio-electrospinning of poly(l-lactic acid) hollow fibrous membrane
    Shih, Yung-Hsun
    Yang, Jen-Chang
    Li, Su-Han
    Yang, Wei-Chung Vivian
    Chen, Chien-Chung
    TEXTILE RESEARCH JOURNAL, 2012, 82 (06) : 602 - 612
  • [6] Preparation and Performance of Poly(D,L-lactic acid)-Polyethylene Glycol-Poly(D,L-lactic acid) Electrospun Fibrous Membranes for Drug Release
    Jiang, Dong
    Zhan, Henan
    Hu, Xiyu
    Luan, Jiashuang
    Zhang, Mei
    JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 2017, 17 (02) : 884 - 892
  • [7] Tailoring Electrospun Poly(L-lactic acid) Nanofibers as Substrates for Microfluidic Applications
    Pimentel, Eduardo S.
    Brito-Pereira, Ricardo
    Marques-Almeida, Teresa
    Ribeiro, Clarisse
    Vaz, Filipe
    Lanceros-Mendez, Senentxu
    Cardoso, Vanessa F.
    ACS APPLIED MATERIALS & INTERFACES, 2020, 12 (01) : 60 - 69
  • [8] ECM Mimetic Electrospun Porous Poly (L-lactic acid) (PLLA) Scaffolds as Potential Substrates for Cardiac Tissue Engineering
    Muniyandi, Priyadharshni
    Palaninathan, Vivekanandan
    Veeranarayanan, Srivani
    Ukai, Tomofumi
    Maekawa, Toru
    Hanajiri, Tatsuro
    Mohamed, Mohamed Sheikh
    POLYMERS, 2020, 12 (02)
  • [9] In vitro degradation of electrospun poly(L-lactic acid)/segmented poly(ester urethane) blends
    Montini-Ballarin, Florencia
    Caracciolo, Pablo C.
    Rivero, Guadalupe
    Abraham, Gustavo A.
    POLYMER DEGRADATION AND STABILITY, 2016, 126 : 159 - 169
  • [10] Identifying the Factors Influencing Formation of Nanoporous Electrospun Poly(L-lactic acid) Fibers
    Zhou Qi-hui
    Zhao Shi-fang
    Bao Min
    Dong Wen
    Zhang Yan-zhong
    2012 INTERNATIONAL FORUM ON BIOMEDICAL TEXTILE MATERIALS, PROCEEDINGS, 2012, : 231 - 235
12345