Analytical solutions of force convective heat transfer in plate heat exchangers partially filled with metal foams

被引：26

作者：

Lu, Wei ^{[1
]}

Zhang, Tao ^{[1
]}

Yang, Mo ^{[1
]}

Wu, Yupeng ^{[2
]}

机构：

[1] Univ Shanghai Sci & Technol, Sch Energy & Power Engn, Shanghai 200093, Peoples R China

[2] Univ Nottingham, Fac Engn, Nottingham NG7 2RD, England

来源：

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2017年 / 110卷

基金：

中国国家自然科学基金;

关键词：

Analytical solution; Heat transfer; Partially filled; Heat exchanger; POROUS-MEDIA; PART I; TEMPERATURE;

D O I：

10.1016/j.ijheatmasstransfer.2017.02.087

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

This paper investigated the flow and thermal characterization of parallel-plate heat exchangers partially filled with metal foams analytically. Firstly, the velocity and temperature distributions in partially filled symmetrical channel have been plotted and the effect of key parameters (e.g. porosity, pore density, height of metal foams, flow ratio in metal-foam filled region) on its flow and heat transfer performance have been analyzed. Then, the results have been applied for combined heat exchangers with symmetrical and asymmetrical channels to have optimized heat transfer performance and relatively low and identical pressure drop for each channel. (C) 2017 Elsevier Ltd. All rights reserved.

引用

页码：476 / 481

页数：6

共 12 条

[1] Experimental study on single-phase heat transfer and pressure drop of refrigerants in a plate heat exchanger with metal-foam-filled channels
Abadi, Gholamreza Bamorovat
Moon, Chanhee
Kim, Kyung Chun
[J]. APPLIED THERMAL ENGINEERING, 2016, 102 : 423 - 431
[2] The effects of compression and pore size variations on the liquid flow characteristics in metal foams
Boomsma, K
Poulikakos, D
[J]. JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME, 2002, 124 (01): : 263 - 272
[3] Heat transfer measurements in metal foam subjected to constant heat flux
Dukhan, Nihad
Chen, Kuan-Chih
[J]. EXPERIMENTAL THERMAL AND FLUID SCIENCE, 2007, 32 (02) : 624 - 631
[4] Fluid temperature measurements inside metal foam and comparison to Brinkman-Darcy flow convection analysis
Dukhan, Nihad
Al-Rammahi, Muntadher A.
Suleiman, Ahmed S.
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2013, 67 : 877 - 884
[5] Analytical characterization and conceptual assessment of solid and fluid temperature differentials in porous media
Lee, DY
Vafai, K
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 1999, 42 (03) : 423 - 435
[6] Thermal analysis on metal-foam filled heat exchangers. Part I: Metal-foam filled pipes
Lu, W.
Zhao, C. Y.
Tassou, S. A.
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2006, 49 (15-16) : 2751 - 2761
[7] Analytical solution of forced convective heat transfer in parallel-plate channel partially filled with metallic foams
Lu, Wei
Zhang, Tao
Yang, Mo
[J]. INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2016, 100 : 718 - 727
[8] Analytical investigation of heat transfer enhancement in a channel partially filled with a porous material under local thermal non-equilibrium condition
Mahmoudi, Yasser
Maerefat, Mehdi
[J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2011, 50 (12) : 2386 - 2401
[9] Heat transfer enhancements in heat exchangers fitted with porous media Part I: constant wall temperature
Mohamad, AA
[J]. INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2003, 42 (04) : 385 - 395
[10] Numerical investigation on self-coupling heat transfer in a counter-flow double-pipe heat exchanger filled with metallic foams
Xu, H. J.
Qu, Z. G.
Tao, W. Q.
[J]. APPLIED THERMAL ENGINEERING, 2014, 66 (1-2) : 43 - 54

← 1 2 →