Digital Design, Analysis and 3D Printing of Prosthesis Scaffolds for Mandibular Reconstruction

被引:12
作者
Moiduddin, Khaja [1 ]
Mian, Syed Hammad [1 ]
Alkhalefah, Hisham [1 ]
Umer, Usama [1 ]
机构
[1] King Saud Univ, Adv Mfg Inst, Riyadh 11421, Saudi Arabia
关键词
mandibular reconstruction; scaffolds; reconstruction plate; finite element analysis; 3D printing; titanium alloy; COMPUTER-ASSISTED DESIGN; FINITE-ELEMENT-ANALYSIS; MECHANICAL-PROPERTIES; POROUS METALS; IMPLANTS; MICROSTRUCTURE; BEHAVIOR; CELLS;
D O I
10.3390/met9050569
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Segmental mandibular reconstruction has been a challenge for medical practitioners, despite significant advances in medical technology. There is a recent trend in relation to customized implants, made up of porous structures. These lightweight prosthesis scaffolds present a new direction in the evolution of mandibular restoration. Indeed, the design and properties of porous implants for mandibular reconstruction should be able to recover the anatomy and contour of the missing region as well as restore the functions, including mastication, swallowing, etc. In this work, two different designs for customized prosthesis scaffold have been assessed for mandibular continuity. These designs have been evaluated for functional and aesthetic aspects along with effective osseointegration. The two designs classified as top and bottom porous plate and inner porous plate were designed and realized through the integration of imaging technology (computer tomography), processing software and additive manufacturing (Electron Beam Melting). In addition, the proposed designs for prosthesis scaffolds were analyzed for their biomechanical properties, structural integrity, fitting accuracy and heaviness. The simulation of biomechanical activity revealed that the scaffold with top and bottom porous plate design inherited lower Von Mises stress (214.77 MPa) as compared to scaffold design with inner porous plate design (360.22 MPa). Moreover, the top and bottom porous plate design resulted in a better fit with an average deviation of 0.8274 mm and its structure was more efficiently interconnected through the network of channels without any cracks or powder material. Verily, this study has demonstrated the feasibility and effectiveness of the customized porous titanium implants in mandibular reconstruction. Notice that the design and formation of the porous implant play a crucial role in restoring the desired mandibular performance.
引用
收藏
页数:20
相关论文
共 50 条
[11]   Solvent-cast 3D printing of magnesium scaffolds [J].
Dong, J. ;
Li, Y. ;
Lin, P. ;
Leeflang, M. A. ;
van Asperen, S. ;
Yu, K. ;
Tumer, N. ;
Norder, B. ;
Zadpoor, A. A. ;
Zhou, J. .
ACTA BIOMATERIALIA, 2020, 114 (114) :497-514
[12]   DESIGN AND PRODUCTION OF EYE PROSTHESIS USING 3D PRINTING [J].
Sedlak, Josef ;
Vocilka, Ondrej ;
Slany, Martin ;
Chladil, Josef ;
Polzer, Ales ;
Varhanik, Matus .
MM SCIENCE JOURNAL, 2020, 2020 :3806-3812
[13]   Recent advance in patient-specific 3D printing templates in mandibular reconstruction [J].
Lu, Tingwei ;
Shao, Zhe ;
Liu, Bing ;
Wu, Tianfu .
JOURNAL OF THE MECHANICAL BEHAVIOR OF BIOMEDICAL MATERIALS, 2020, 106
[14]   Design and 3D Printing of Hydrogel Scaffolds with Fractal Geometries [J].
Warner, John ;
Soman, Pranav ;
Zhu, Wei ;
Tom, Matthew ;
Chen, Shaochen .
ACS BIOMATERIALS SCIENCE & ENGINEERING, 2016, 2 (10) :1763-1770
[15]   3D printing-assisted design of scaffold structures [J].
Kantaros, Antreas ;
Chatzidai, Nikoleta ;
Karalekas, Dimitris .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (1-4) :559-571
[16]   Design and fabrication of biomimicking radially graded scaffolds via digital light processing 3D printing for bone regeneration [J].
Wang, Yue ;
Chen, Shangsi ;
Liang, Haowen ;
Bai, Jiaming ;
Wang, Min .
JOURNAL OF MATERIALS CHEMISTRY B, 2023, 11 (41) :9961-9974
[17]   Advancements in Digital Manufacturing for Metal 3D Printing [J].
Liu Zhuangzhuang ;
Ding Minglu ;
Xie Jianxin .
ACTA METALLURGICA SINICA, 2024, 60 (05) :569-584
[18]   3D Printing and Characterization of Microsphere Hydroxyapatite Scaffolds [J].
Wu Zhongcao ;
Huan Zhiguang ;
Zhu Yufang ;
Wu Chengtie .
JOURNAL OF INORGANIC MATERIALS, 2021, 36 (06) :601-607
[19]   Design and Manufacturing of Flexible Finger Prosthesis Using 3D Printing [J].
Pinto, V. V. P. ;
Alvarez-Jacobo, J. E. ;
Da Gama, A. E. F. .
XXVII BRAZILIAN CONGRESS ON BIOMEDICAL ENGINEERING, CBEB 2020, 2022, :419-424
[20]   Design and Biomechanical Analysis of a Novel Mandibular Prosthesis [J].
Wang, D. M. ;
Wang, C. T. ;
Qu, A. L. ;
Xu, X. L. ;
Zhang, C. P. .
WORLD CONGRESS ON MEDICAL PHYSICS AND BIOMEDICAL ENGINEERING 2006, VOL 14, PTS 1-6, 2007, 14 :2797-+