Precise position synchronous control of multi-axis servo system

被引:50
作者
Jeong, Seok-Kwon [2 ]
You, Sam-Sang [1 ]
机构
[1] Korea Maritime Univ, Sch Mech & Informat Engn, Pusan 606791, South Korea
[2] Pukyong Natl Univ, Sch Mech Engn, Pusan, South Korea
关键词
multi-axis servo system; DC motor dynamics; position synchronous control; acceleration control; speed control; maximum error comparison; position error; load disturbances; stability; robustness;
D O I
10.1016/j.mechatronics.2007.10.009
中图分类号
TP [自动化技术、计算机技术];
学科分类号
0812 ;
摘要
This paper describes a precise position synchronous control of multi-axis rotating system. The control strategies to achieve precise servo system are summarized in two main points: an acceleration control is adopted in an inner loop to ensure robustness of speed of each axis against disturbances, and then a maximum error comparison method has been introduced to minimize not only position synchronous errors but also speed errors of all motor axes. At first, the system dynamics including dc motor drive are rigorously presented by using motor circuit equations and Newton's formulation. Next, the acceleration and speed controllers are readily designed via proportional-integral (PI) control law. Also, to reduce position synchronous errors caused by different motor dynamics, each axis is coupled by the maximum error comparison scheme. The control system presented is investigated through extensive simulations under step- and sinusoidal-type disturbances. Finally, it has been shown that experimental results successfully demonstrate the effectiveness of the proposed control system for four-axis position synchronous control. (c) 2007 Published by Elsevier Ltd.
引用
收藏
页码:129 / 140
页数:12
相关论文
共 11 条
[1]  
BYUN JH, 1996, KSPE, V13, P115
[2]  
BYUN JH, 2001, T ASME A, V25, P242
[3]  
GOTO S, 1994, SICE, V30, P669
[4]  
Jeong Seok Kwon, 2004, [Transactions of the KSME, A, 대한기계학회논문집 A], V28, P1245
[5]  
JEONG SK, 2001, KSME, V25, P2078
[6]  
Kamano T., 1993, T SOC INSTRUMENT CON, V29, P785
[7]  
KAMANO T, 1993, SICE, V6, P488
[8]  
Nakamura M., 1997, Transactions of the Society of Instrument and Control Engineers, V33, P274
[9]   ESTIMATION, IDENTIFICATION, AND SENSORLESS CONTROL IN MOTION CONTROL-SYSTEM [J].
OHNISHI, K ;
MATSUI, N ;
HORI, Y .
PROCEEDINGS OF THE IEEE, 1994, 82 (08) :1253-1265
[10]   SYNCHRONIZATION OF 2 MOTION CONTROL AXES UNDER ADAPTIVE FEEDFORWARD CONTROL [J].
TOMIZUKA, M ;
HU, JS ;
CHIU, TC ;
KAMANO, T .
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 1992, 114 (02) :196-203