DIMENSIONAL STABILITY ANALYSIS IN Al-Si ALLOYS

被引：0

作者：

Peter, Ildiko ^{[1
]}

Varga, Bela ^{[2
]}

Rosso, Mario ^{[1
]}

机构：

[1] Politecn Torino, Turin, Italy

[2] Transilvania Univ Brasov, Brasov, Romania

来源：

METALURGIA INTERNATIONAL | 2011年 / 16卷 / 04期

关键词：

Al-Si alloys; dilatometric analysis; dimensional modification; activation energy;

D O I：

暂无

中图分类号：

TF [冶金工业];

学科分类号：

0806 ;

摘要：

In this paper dimensional stability investigation in two hypoeutectic composition is proposed. Specifically, the study of some samples in AlSi7Mg0,3 and AlSi8,5Cu3,5 alloys is realized and a comparison of the obtained data will be discussed. Starting from dilatometric analysis the dimensional modification of the alloys is monitored. For both materials analysis has been conducted by heating to 500 degrees C at various heating rates and determining the activation energy for the decomposition process of the supersaturated solid solution. The morphological characterization of the alloys is performed at equilibrium in a metastable state by means of optical and scanning electron microscopy The evaluation of structural changes in the alloys was confirmed by microhardness measurements.

引用

页码：5 / 9

页数：5

共 11 条

[1]

[Anonymous], 2002, ANAL ANAL CHEM, DOI DOI 10.1021/AC60131A045

[2] Microstructural coarsening of semi-solid aluminium alloys [J].

Atkinson, H. V. ;

Liu, D. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 496 (1-2) :439-446

[3]

Atkinson H.V., 2008, MAT SCI ENG A-STRUCT, V496, P25

[4]

Atkinson H.V., 2008, MAT SCI ENG A-STRUCT, V496, P1

[5] THE LATTICE SPACINGS OF SOLID SOLUTIONS OF DIFFERENT ELEMENTS IN ALUMINIUM [J].

AXON, HJ ;

HUMEROTHERY, W .

PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL AND PHYSICAL SCIENCES, 1948, 193 (1032) :1-24

[6]

BADAEV VG, 1992, VLIIANIE SKOROSTI OH, P21

[7]

PANSERII C, 1940, ALLUMINIO SUE LEGHE

[8]

Peter I, 2009, METAL INT, V14, P15

[9] Effects of T5 and T6 Heat Treatments Applied to Rheocast A356 Parts for Automotive Applications [J].

Rosso, M. ;

Peter, I. ;

Villa, R. .

SEMI-SOLID PROCESSING OF ALLOYS AND COMPOSITES X, 2008, 141-143 :237-+

[10]

ROSSO M, 2006, P 3 INT C HIGH TECH

← 1 2 →