Beam shaping optics for YAG laser by using CNC lathe

被引：0

作者：

Kuwano, R ^{[1
]}

Tokunaga, T ^{[1
]}

Kataoka, Y ^{[1
]}

机构：

[1] Fukuyama Polytech Coll, Mech Engn Sect, Fukuyama, Hiroshima 7200074, Japan

来源：

OPTOMECHATRONIC SYSTEMS IV | 2003年 / 5264卷

关键词：

laser; beam shaping; aspherical lens; beam profile; CNC lathe;

D O I：

10.1117/12.516270

中图分类号：

TP18 [人工智能理论];

学科分类号：

081104 ; 0812 ; 0835 ; 1405 ;

摘要：

A method for abeam shaping optics is proposed to convert a laser beam profile into required intensity distribution. A beam shaper with aspherical surface is calculated by Snell's law converted from measured irradiate beam profile to required profile. An acrylic resin is cut by a ball type grinding wheel consisted on diamond powder and polished by a cone type felt buff with alumina ceramics powder. A CNC lathe is used to control these tools position. A shaper with 4mm of thickness works to convert multi-mode beam profile with 13mm of diameter into a flat top cylinder with I mm of diameter. Its working distance is 60mm. Its transmittance is over 98%. It suceed to generate uniform melting mark of 0.6mm diameter on the steel target by YAG laser process.

引用

页码：237 / 240

页数：4

共 6 条

[1] Dickey FM, 2003, OPT PHOTONICS NEWS, V14, P30, DOI 10.1364/OPN.14.4.000030
[2] DICKEY M, 2000, LASER BEAM SHAPING T
[3] Gaussian laser beam shaping: Test and evaluation
Holswade, SC
Dickey, FM
[J]. CURRENT DEVELOPMENTS IN OPTICAL DESIGN AND ENGINEERING VI, 1996, 2863 : 237 - 245
[4] BINARY COMPUTER-GENERATED HOLOGRAMS
LEE, WH
[J]. APPLIED OPTICS, 1979, 18 (21): : 3661 - 3669
[5] BEAM PROFILE SHAPING FOR LASER RADARS THAT USE DETECTOR ARRAYS
VELDKAMP, WB
KASTNER, CJ
[J]. APPLIED OPTICS, 1982, 21 (02): : 345 - 356
[6] LASER-BEAM PROFILE SHAPING WITH INTERLACED BINARY DIFFRACTION GRATINGS
VELDKAMP, WB
[J]. APPLIED OPTICS, 1982, 21 (17): : 3209 - 3212

← 1 →