The ECW installation at the TEXTOR tokamak

被引:3
|
作者
Oosterbeek, JW [1 ]
Bongers, WA
van der Grift, AF
Hoekzema, JA
Kruijt, OG
Poelman, AJ
Prins, PR
Scholten, J
Schüller, FC
Tito, CJ
Westerhof, E
机构
[1] EURATOM, Forschungszentrum Julich GmbH, Inst Plasmaphys, D-52425 Julich, Germany
[2] EURATOM, FOM, Inst Plasmafys Rijnhuizen, NL-3430 BE Nieuwegein, Netherlands
关键词
TEXTOR; gyrotron; control;
D O I
10.1016/S0920-3796(03)00090-5
中图分类号
TL [原子能技术]; O571 [原子核物理学];
学科分类号
0827 ; 082701 ;
摘要
Previous electron cyclotron wave experiments on TEXTOR were performed using a 110 GHz, 350 kW, 200 ms gyrotron. The installation is presently extended with a new gyrotron at 140 GHz, which produces more than 800 kW of RF power in a Gaussian beam for more than 3 s at 1% duty cycle. Auxiliary systems have been overhauled and upgraded. The installation can be conveniently switched between gyrotrons while the control system is kept extremely versatile allowing to switch between manual expert operation and fully automated operation from the TEXTOR control room. A scheme is being developed to allow control of the steerable launcher depending on real-time plasma parameters. (C) 2003 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:515 / 519
页数:5
相关论文
共 50 条
  • [1] New electron cyclotron emission diagnostics for the TEXTOR tokamak
    van de Pol, MJ
    Udintsev, VS
    Donné, AJH
    Krämer-Flecken, A
    Deng, BH
    Domier, CW
    Luhmann, NC
    Park, HK
    Mazzucato, E
    FUSION ENGINEERING AND DESIGN, 2001, 53 (1-4) : 177 - 183
  • [2] Overview of wall probes for erosion and deposition studies in the TEXTOR tokamak
    Rubel, M.
    Brezinsek, S.
    Coenen, J. W.
    Huber, A.
    Kirschner, A.
    Kreter, A.
    Petersson, P.
    Philipps, V.
    Pospieszczyk, A.
    Schweer, B.
    Sergienko, G.
    Tanabe, T.
    Ueda, Y.
    Wienhold, P.
    MATTER AND RADIATION AT EXTREMES, 2017, 2 (03) : 87 - 104
  • [3] Performance and erosion of a tungsten brush limiter exposed at the TEXTOR tokamak
    Hirai, T
    Philipps, V
    Huber, A
    Sergienko, G
    Linke, J
    Wakui, T
    Tanabe, T
    Rubel, M
    Wada, M
    Ohgo, T
    Pospieszczyk, A
    Ohya, K
    Barabash, V
    JOURNAL OF NUCLEAR MATERIALS, 2003, 313 : 67 - 71
  • [4] Preliminary study of the influence of DED on carbon radiation and transport in the TEXTOR tokamak
    Telesea, G
    Crombé, K
    Tokar, M
    Unterberg, B
    Verdoolaege, G
    Zagorski, R
    Van Oost, G
    JOURNAL OF NUCLEAR MATERIALS, 2005, 337 (1-3) : 361 - 365
  • [5] Local migration studies of high-Z metals in the TEXTOR tokamak
    Weckmann, A.
    Petersson, P.
    Rubel, M.
    Wienhold, P.
    Brezinsek, S.
    Coenen, J. W.
    Kirschner, A.
    Kreter, A.
    Pospieszczyk, A.
    PHYSICA SCRIPTA, 2016, T167
  • [6] Particle collection at the plasma edge by a fast reciprocating probe at the TEXTOR tokamak
    Emmoth, B
    Wienhold, P
    Rubel, M
    Schweer, B
    Zagórski, R
    JOURNAL OF NUCLEAR MATERIALS, 2003, 313 : 729 - 733
  • [7] Whole-machine material migration studies in the TEXTOR tokamak with molybdenum
    Weckmann, A.
    Petersson, P.
    Kirschner, A.
    Wienhold, P.
    Brezinsek, S.
    Kreter, A.
    Pospieszczyk, A.
    Rubel, M.
    NUCLEAR MATERIALS AND ENERGY, 2017, 12 : 518 - 523
  • [8] Experimental study on neoclassical properties of the ions in the edge plasma of the tokamak TEXTOR
    Hothker, K
    Bieger, W
    Brix, M
    Pospieszczyk, A
    Schorn, RP
    Schweer, B
    VanOost, G
    Weynants, R
    JOURNAL OF NUCLEAR MATERIALS, 1997, 241 : 839 - 841
  • [9] Exposure of CFC-materials to high transient heat loads in the TEXTOR tokamak
    Scholz, T
    Boedo, J
    Bolt, H
    Duwe, R
    Finken, KH
    Gray, D
    Hassanein, A
    JOURNAL OF NUCLEAR MATERIALS, 1997, 241 : 848 - 852
  • [10] Critical heat flux loading experiments on CVD-W coating in the TEXTOR tokamak
    Hirai, T
    Kreter, A
    Linke, J
    Malzbender, J
    Ohgo, T
    Philipps, V
    Pintsuk, G
    Pospieszczyk, A
    Sakawa, Y
    Sergienko, G
    Tanabe, T
    Ueda, Y
    Wada, M
    FUSION ENGINEERING AND DESIGN, 2006, 81 (1-7) : 175 - 180