Effects of N2/CO2 atmosphere on the pyrolysis characteristics for municipal solid waste pellets

被引:25
|
作者
Yue, Chengyan [1 ]
Gao, Peipei [1 ]
Tang, Longfei [1 ]
Chen, Xueli [1 ]
机构
[1] East China Univ Sci & Technol, Shanghai Engn Res Ctr Coal Gasificat, Shanghai 200237, Peoples R China
基金
中国国家自然科学基金;
关键词
Municipal solid waste; Pelletization; Carbon dioxide; Reactivity; CO-PYROLYSIS; FUNCTIONAL-GROUPS; BIOMASS; GASIFICATION; CHAR; FTIR; TAR; REACTIVITY; CONVERSION; MECHANISM;
D O I
10.1016/j.fuel.2022.123233
中图分类号
TE [石油、天然气工业]; TK [能源与动力工程];
学科分类号
0807 ; 0820 ;
摘要
The pyrolysis characteristics of cylindrical municipal solid waste (MSW) pellets were studied in N-2/CO2 atmospheres with different proportion in fixed bed reactor. Gas release property, tar composition and char structure were analyzed and discussed. Results showed that the addition of CO2 in the pyrolysis atmosphere increased the yields of char and gas, and decreased the tar yield significantly. For the gas components, the CO yield increased noticeably as CO2 present, while the contents of light hydrocarbon and H-2 decreased. The volume fraction of CO increased from 15% (100% N-2) to 22% (10% CO2) and 34% (20% CO2) at 700 degrees C. The volume fraction of H2 decreased from 21% (100% N-2) to 10% (10% CO2) and 7% (20% CO2) at 700 degrees C. In addition, the CH4 yield increased with the proportion of CO2. For the tar components, external CO2 contributed to eliminate asymmetric substitutions and dearomatization. In addition, the aromatic rings, polycyclic aromatic hydrocarbons, and asymmetric aliphatic hydrocarbon structures were reduced in the N-2/CO(2 )atmosphere. At the temperature above 600 degrees C, CO2 was favorable to the cracking of the small ring structures, which led to collapse the micro-pores and resulted in the lower accumulative pore volume of the char. At 700 degrees C, the specific surface area of pyrolytic char was 14.32 m(2)/g in (2), when CO2 added, this value increased by 35%, which was further enlarged as the proportion of CO2 increasing.
引用
收藏
页数:10
相关论文
共 50 条
  • [21] LATTICE VIBRATIONS SPECTRA OF SOLID N2 CO2 AND CO
    RON, A
    SCHNEPP, O
    ISRAEL JOURNAL OF CHEMISTRY, 1966, 4 (1A) : P46 - &
  • [22] Thermochemical decomposition of sewage sludge CO2 and N2 atmosphere
    Jindarom, Charothon
    Meeyoo, Vissanu
    Rirksomboon, Thirasak
    Rangsunvigit, Pramoch
    CHEMOSPHERE, 2007, 67 (08) : 1477 - 1484
  • [23] Reproducibility of lithium silicate pellets in N2 atmosphere
    Essaki, Kenji
    Kato, Masahiro
    JOURNAL OF CHEMICAL ENGINEERING OF JAPAN, 2006, 39 (11) : 1161 - 1164
  • [24] Study on the conversion of CaCl2 with H2O and CO2 for dechlorinating pyrolysis of municipal solid waste
    Wang, Ze
    Zhang, Changfeng
    Li, Songgeng
    THERMOCHIMICA ACTA, 2022, 717
  • [25] Pyrolysis of food waste over a Pt catalyst in CO2 atmosphere
    Kim, Soosan
    Lee, Jechan
    JOURNAL OF HAZARDOUS MATERIALS, 2020, 393
  • [26] RAMAN SPECTRA OF SOLID CO2, N2O, N2, AND CO
    CAHILL, JE
    LEROI, GE
    JOURNAL OF CHEMICAL PHYSICS, 1969, 51 (04): : 1324 - &
  • [27] Novel Injection Molding Foaming Approaches Using Gas-Laden Pellets With N2, CO2, and N2 + CO2 as the Blowing Agents
    Sun, Xiaofei
    Turng, Lih-Sheng
    POLYMER ENGINEERING AND SCIENCE, 2014, 54 (04): : 899 - 913
  • [28] Lignite pyrolysis and oxy-fuel combustion characteristics under N2 and CO2 atmospheres
    Shan S.-Q.
    Zhou Z.-J.
    Kuang J.-P.
    Zhang Y.
    Cen K.-F.
    Zhejiang Daxue Xuebao (Gongxue Ban)/Journal of Zhejiang University (Engineering Science), 2019, 53 (09): : 1826 - 1834
  • [29] Pyrolysis characteristics and gaseous products of bamboo shoot shells under N2 and CO2 atmospheres
    Hou, Yanmei
    Gao, Qi
    He, Yuyu
    Ni, Liangmeng
    Ren, Hao
    Su, Mengfu
    Rong, Shaowen
    Liu, Zhijia
    RENEWABLE ENERGY, 2023, 215
  • [30] Study of the effects of temperature and pressure on the coal pyrolysis in the atmosphere of N2
    Wu J.
    Di Z.
    Luo M.
    Wang Y.
    Ding X.
    Li H.
    Huagong Jinzhan/Chemical Industry and Engineering Progress, 2019, 38 (S1): : 116 - 121