THE EFFICIENCY OF FLY ASH AND CEMENT SLAG TO DEVELOPMENT BUILDING

被引:3
|
作者
Hidayawanti, Ranti [1 ]
Legino, Supriadi [2 ]
Sangadji, Iriansyah [2 ]
Widodo, Rony Panca Adi [3 ]
机构
[1] Sekolah Tinggi Tekn PLN, Civil Engn Dept, Jakarta, Indonesia
[2] Sekolah Tinggi Tekn PLN, Informat Dept, Jakarta, Indonesia
[3] Project Concrete Mix Design Adhimix Precast, Head Div, Jakarta, Indonesia
来源
INTERNATIONAL JOURNAL OF GEOMATE | 2019年 / 16卷 / 57期
关键词
Fly Ash; Cement slag; Compressive strength; Production cost; High rise building; PERFORMANCE;
D O I
10.21660/2019.57.4857
中图分类号
TU [建筑科学];
学科分类号
0813 ;
摘要
In world construction, the construction of high-rise buildings almost entirely uses concrete. This study uses fly ash and cement slag as a cement substitute as a reduction in cement requirements. This is due to the limited amount of cement in the market and the binding function of cement and the increasing cement prices. The use of fly ash and cement slag is toxic hazardous waste material that must be handled so that it can be used properly. From the results of the age strength of concrete 1-3 days, the compressive strength of fly ash is higher than that of cement slag but from a mixture of 28 days, it reaches 100% in accordance with the specified standard. In this laboratory test for the use of fly ash and slag cement, 50%, in the future it is necessary to research that the use of fly ash and slag cement can be up to 70% so that the use of fly ash material and cement slag can replace the function of concrete mixed cement as a binder of coarse and fine material to get concrete compressive strength with specified standards. Production costs can be minimized so that if this applied can avoid the company from potential billions/year losses.
引用
收藏
页码:95 / 100
页数:6
相关论文
共 50 条
  • [21] Utilization of ladle furnace slag and fly ash as partially replacement of cement
    Thwe, Khin Sam
    Ayawanna, Jiratchaya
    Mase, Lindung Zalbuin
    Chaiyaput, Salisa
    CLEANER ENGINEERING AND TECHNOLOGY, 2025, 25
  • [22] Expansion of cement containing crystalline magnesia with and without fly ash and slag
    Liu, Z
    Tang, MS
    Cui, XH
    CEMENT CONCRETE AND AGGREGATES, 1998, 20 (01): : 180 - 185
  • [23] Effects of Municipal Solid Waste Incinerator Fly Ash Slag on the Strength and Porosity of Slag-Blended Cement Pastes
    Lin, Kae-Long
    Lin, Deng-Fong
    Chao, Sao-Jeng
    ENVIRONMENTAL ENGINEERING SCIENCE, 2009, 26 (06) : 1081 - 1086
  • [24] Ternary alkali aluminosilicate cement based on rice husk ash, slag and coal fly ash
    Darsanasiri, A. G. N. D.
    Matalkah, Faris
    Ramli, Salina
    Al-Jalode, Kutaibah
    Balachandra, Anagi
    Soroushian, Parviz
    JOURNAL OF BUILDING ENGINEERING, 2018, 19 : 36 - 41
  • [25] Rheological properties of ordinary portland cement - Blast furnace slag fly ash blends containing ground fly ash
    Park, Hyo Sang
    Yoo, Dong Woo
    Byun, Seung Ho
    Song, Jong Taek
    Journal of the Korean Ceramic Society, 2009, 46 (01): : 58 - 68
  • [26] Effect of cement incorporation on the leaching characteristics of elements from fly ash and slag treated soils
    Mahedi, Masrur
    Cetin, Bora
    Dayioglu, Asli Y.
    JOURNAL OF ENVIRONMENTAL MANAGEMENT, 2020, 253
  • [27] Rheological Properties of Ordinary Portland Cement - Blast Furnace Slag - Fly Ash Blends Containing Ground Fly Ash
    Park, Hyo Sang
    Yoo, Dong woo
    Byun, Seung Ho
    Song, Jong Taek
    JOURNAL OF THE KOREAN CERAMIC SOCIETY, 2009, 46 (01) : 58 - 68
  • [28] The effects of cement/fly ash ratios on the volcanic slag aggregate lightweight concrete masonry units
    Demirdag, S.
    Ugur, I.
    Sarac, S.
    CONSTRUCTION AND BUILDING MATERIALS, 2008, 22 (08) : 1730 - 1735
  • [29] Microstructural and other properties of copper slag–coal bottom ash incorporated concrete using fly ash as cement replacement
    Gaurav Singh
    Innovative Infrastructure Solutions, 2023, 8
  • [30] Influence of Environment on Durability of Fly Ash Cement Mortars
    Marcos Ortega, J.
    Sanchez, Isidro
    Anton, Carlos
    de Vera, Guillem
    Climent, Miguel A.
    ACI MATERIALS JOURNAL, 2012, 109 (06) : 647 - 656