Initial stages of plasma electrolytic oxidation of titanium

The initial stages of oxide growth on titanium are examined in a recently developed commercial alkaline pyrophosphate/aluminate electrolyte of interest for plasma electrolytic oxidation of light metal alloys. Constant current anodizing was employed, with resultant films examined by scanning and transmission electron microscopies and Rutherford backscattering spectroscopy. The initial film is relatively uniform and composed of TiO2, with low concentrations of aluminium and phosphorus species incorporated from the electrolyte. With increase in voltage the film breaks down locally, and regions of original and modified film develop simultaneously, with the latter occupying more of the surface as the voltage rises. Porous regions due to dielectric breakdown also become increasingly evident. At similar to240 V, sparking commences, and the surface reveals extensive, relatively uniform porosity, with the coating now containing much enhanced concentrations of aluminium and phosphorus species compared with the coating at lower voltages. The films develop at low efficiency due to generation of oxygen. The oxygen is produced within the original film material and at sites of dielectric breakdown. The former type of film develops a two-layered morphology, with an outer layer of amorphous TiO2 and an inner layer with numerous fine and course cavities. The cavities are due to the generation of oxygen that may be associated with the formation of anatase in the inner layer. (C) 2003 Elsevier Ltd. All rights reserved.