Seismic enhancement of multi-span continuous bridges subjected to three-directional excitations

被引:13
作者
Aryan, H. [1 ]
Ghassemieh, M. [1 ]
机构
[1] Univ Tehran, Coll Engn, Sch Civil Engn, Tehran, Iran
关键词
multi-span continuous bridge; three-directional seismic excitations; retrofitting; superelastic; nonlinear time history analysis; BEHAVIOR; RETROFIT;
D O I
10.1088/0964-1726/24/4/045030
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
Considering the seismic ground motions as the excitations in only two principal horizontal directions of the bridges and ignoring the third vertical direction is a disregard for the seismic conditions of the region and the bridge distance from epicenter. Numerous cases of substantial damages have been reported among the bridges tremendously suffered from being exposed to the simultaneous three-directional seismic ground motions. Besides the significant compression and tension damages in the columns due to the presence of vertical excitation, it could lead to unexpected shear and flexural failures in the columns and other components as well. Because the axial force variation in the columns due to three-directional excitations, could affect the demands and capacities of the bridge's components. With respect to this issue, several studies on the bridge damages during the earthquakes have urged researchers to offer efficient methods for bridges handling of the three-directional seismic excitations. Thus, this paper presents and evaluates a superelastic based system for designing as well as retrofitting the multi-span continuous (MSC) bridges that can cope with two-and three-directional seismic excitations. Efficiency evaluation of the proposed system is conducted through various nonlinear time history analyses on a three-dimensional model of a detailed MSC bridge using a suite of developed ground motions for the bridge region. Also, all the analyses are fulfilled based on variation of one influential design characteristic of the proposed system in order to achieve the optimal design. Several pertinent assessment parameters are used during the evaluation of the proposed system. Finally, the efficiency of the new system subjected to the vertical and horizontal seismic excitations is confirmed according to reduction of the bridge responses and improvement in nonlinear performance of the columns in comparison with the as-built bridge results.
引用
收藏
页数:13
相关论文
共 23 条
[1]   Hysteresis behavior of t-stub connections with superelastic shape memory fasteners [J].
Abolmaali, Ali ;
Treadway, Jason ;
Aswath, Pranesh ;
Lu, Frank K. ;
McCarthy, Emily .
JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH, 2006, 62 (08) :831-838
[2]  
[Anonymous], 2005, ANAL FRAGILITY CURVE
[3]   Innovative Superelastic Isolation Device [J].
Attanasi, Gabriele ;
Auricchio, Ferdinando .
JOURNAL OF EARTHQUAKE ENGINEERING, 2011, 15 :72-89
[4]   Seismic Vulnerability Assessment of a Multi-Span Continuous Highway Bridge Fitted with Shape Memory Alloy Bars and Laminated Rubber Bearings [J].
Bhuiyan, M. A. Rahman ;
Alam, M. Shahria .
EARTHQUAKE SPECTRA, 2012, 28 (04) :1379-1404
[5]  
California Department of Transportation (Caltrans), 2013, CALTR SEISM DES CRIT
[6]  
Canadian Standards Association, 2006, CANCSAS606
[7]   Experimental study of non-circular concrete elements actively confined with shape memory alloy wires [J].
Chen, Qiwen ;
Shin, Moochul ;
Andrawes, Bassem .
CONSTRUCTION AND BUILDING MATERIALS, 2014, 61 :303-311
[8]  
Choi E., 2002, Seismic analysis and retrofit of mid-America bridges
[9]   Seismic retrofit of simply supported bridges using shape memory alloys [J].
DesRoches, R ;
Delemont, M .
ENGINEERING STRUCTURES, 2002, 24 (03) :325-332
[10]   Shape memory alloy wire-based smart natural rubber bearing [J].
Dezfuli, F. Hedayati ;
Alam, M. Shahria .
SMART MATERIALS AND STRUCTURES, 2013, 22 (04)