Performance-based seismic design framework for RC floor diaphragms in dual systems

Floor diaphragms play several roles in the seismic response of dual systems: support vertically spanning components, transfer lateral forces to walls and frames, provide restraint to columns and walls, tie the structure together, and enable redundant load paths for lateral forces. In many buildings after events as recent as the 2010-2011 Christchurch earthquakes, floor diaphragms were unable to perform one or more of these functions, leading to extensive damage and collapse. Research consistently highlights three underlying causes: a failure to ensure the integrity of the load path, underestimation of in-plane forces, and poorly understood interactions with walls, supporting beams and RC moment frames. Most recent and ongoing research has focused on modifying the prescriptive code provisions, and indeed many codes -but not all-have been consequently updated. Such prescriptive rules, however, are not helpful for assessing existing buildings, comparing alternate means and methods, or in displacement-based design (DBD) for which a performance-based design (PBD) framework is necessary. This paper proposes a new performance-based framework for the seismic design of reinforced-concrete (RC) floor diaphragms with or without precast elements. The floor diaphragm performance limit states (LS) are re-defined in terms of the observed failure modes (FM). Results from prior research on these failure modes are used to select damage measures (DM, e.g. 'crack width') for pairs of FM and LS. Expressions for DMs in terms of engineering demand parameters (EDP, e.g., 'strain') are derived from experimental results or from first principles. EDPs are the basic output from numerical analysis in PBD; this paper comments on the suitability of different analytical approaches. (C) 2017 The Authors. Published by Elsevier Ltd.