Detection of Axial Cracks in Pipes Using Focused Guided Waves

The implementation of synthetic guided wave focusing to locate axially aligned defects in pipes has been investigated. Results from both finite element computer models and experiments on real pipes are presented and the data show good agreement. Focusing is necessary to improve the reflection coefficient from axially aligned defects, as the signals are very weak. The Common Source Method (CSM) of synthetic focusing has been applied which makes it possible to apply focusing via post processing to previously collected data. The dependence of reflection coefficient on crack length was measured for both through thickness and part depth axially aligned defects, at a range of frequencies, using the torsional guided wave family. The results show that the reflection coefficient is approximately doubled when focusing is employed, compared to the sensitivity for unfocused fundamental torsional waves. However the sensitivity is still very low, so in practise this approach could only be used to find severe defects.