Effect of Surface Treatment on Betel Nut () Fiber in Polypropylene Composite

被引:29
作者
Chakrabarty, J. [1 ]
Hassan, M. Masudul [1 ]
Khan, Mubarak A. [2 ]
机构
[1] Natl Univ, Dept Chem, MC Coll, Sylhet 3100, Bangladesh
[2] Bangladesh Atom Energy Commiss, Inst Radiat & Polymer Sci, Dhaka, Bangladesh
关键词
Betel nut fiber; Composites; Tensile properties; Detergent wash; Alkali treatment; JUTE YARN; PERFORMANCE; THERMOPLASTICS; TENSILE;
D O I
10.1007/s10924-011-0405-2
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Betel nut fiber (Bn)/polypropylene (PP) composites were prepared in the different ratio of 10:90, 20:80, 30:70, 40:60 (Bn wt%:PP wt%) using extruding and hot press moulding technique. From the results, it can be inferred that Bn30:PP70 mixture composite (BnPP) showed better performance among the composites prepared. For further improvement, betel nut fiber was subjected to detergent wash as well as alkali treatment for composite preparation. This work investigated the tensile strength, bending strength, tensile modulus, bending modulus, elongation at break and impact strength of the composites. Fracture morphology of the composite as well as the water absorption capacity has been monitored.
引用
收藏
页码:501 / 506
页数:6
相关论文
共 23 条
[1]  
Bahl BS, 2001, ADV ORG CHEM, P659
[2]   THE EFFECT OF SILANE TREATMENT ON THE MECHANICAL AND PHYSICAL-PROPERTIES OF SISAL-EPOXY COMPOSITES [J].
BISANDA, ETN ;
ANSELL, MP .
COMPOSITES SCIENCE AND TECHNOLOGY, 1991, 41 (02) :165-178
[3]   Physico-mechanical studies of wood fiber reinforced composites [J].
Bledzki, AK ;
Faruk, O ;
Huque, M .
POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2002, 41 (03) :435-451
[4]   RHEOLOGY OF SHORT GLASS FIBER-REINFORCED THERMOPLASTICS AND ITS APPLICATION TO INJECTION-MOLDING .2. THE EFFECT OF MATERIAL PARAMETERS [J].
CROWSON, RJ ;
FOLKES, MJ .
POLYMER ENGINEERING AND SCIENCE, 1980, 20 (14) :934-940
[5]   THE NATURE OF ADHESION IN COMPOSITES OF MODIFIED CELLULOSE FIBERS AND POLYPROPYLENE [J].
FELIX, JM ;
GATENHOLM, P .
JOURNAL OF APPLIED POLYMER SCIENCE, 1991, 42 (03) :609-620
[6]   Effects of environment on the properties of low-density polyethylene composites reinforced with pineapple-leaf fibre [J].
George, J ;
Bhagawan, SS ;
Thomas, S .
COMPOSITES SCIENCE AND TECHNOLOGY, 1998, 58 (09) :1471-1485
[7]   Exploratory study on seaweed as novel filler in polypropylene composite [J].
Hassan, M. Masudul ;
Mueller, Marco ;
Wagners, Manfred H. .
JOURNAL OF APPLIED POLYMER SCIENCE, 2008, 109 (02) :1242-1247
[8]   Study on the Performance of Hybrid Jute/Betel Nut Fiber Reinforced Polypropylene Composites [J].
Hassan, M. Masudul ;
Wagner, Manfred H. ;
Zaman, Hayder U. ;
Khan, Mubarak A. .
JOURNAL OF ADHESION SCIENCE AND TECHNOLOGY, 2011, 25 (6-7) :615-626
[9]   Physico-Mechanical Performance of Hybrid Betel Nut (Areca catechu) Short Fiber/Seaweed Polypropylene Composite [J].
Hassan, M. Masudul ;
Wagner, Manfred H. ;
Zaman, H. U. ;
Khan, Mubarak A. .
JOURNAL OF NATURAL FIBERS, 2010, 7 (03) :165-177
[10]   Influence of additives on the performance of photografted jute yarn with 3-(trimethoxysilyl)propylmethacrylate [J].
Hassan, MM ;
Islam, MR ;
Khan, MA .
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION, 2005, 10 (3-4) :179-194