Passive control of vortex-induced vibration by spanwise grooves

The objective of this numerical study is to investigate the effect of spanwise grooves on the suppression of vortex-induced vibration (VIV) and the reduction of drag force. For this purpose, we consider a standard configuration of the elastically mounted circular cylinder, which is free to vibrate in both streamwise and transverse directions with identical natural frequency. We introduce a novel staggered groove configuration whose geometry is especially designed by offsetting the cross-sectional portion of the cylinder continuously along the spanwise direction. We assess the characteristic VIV responses of the proposed staggered groove configuration against the helical surface grooves for the identical dimensions and physical conditions. The staggered and helical groove configurations differ only in their arrangement of cross-section geometry along the spanwise direction. Three-dimensional coupled fluid-structure simulations are conclucted at low mass and damping values with moderate Reynolds number of Re = 4800. The effective width and the depth of surface grooves are determined to characterize the size effects for the assessment of staggered and helical groove configurations. Results show that the staggered groove configuration is effective in suppressing VIV, wherein the net reductions of 37% in the peak transverse amplitude and about 25% in the mean drag coefficient are observed in comparison to the plain cylinder counterpart. Staggered groove configuration produces three dominant effects by introducing a continuous jump in the cross-sectional geometry along the spanwise direction: (i) reduction of the spanwise correlation, (ii) enhancement of the three-dimensional effects in the near-wake flow, and (iii) broadening of the frequency spectra of fluid forces. As a result of these physical effects, the transfer of energy from the surrounding fluid flow to the vibrating grooved-cylinder system is reduced as compared to its plain cylinder counterpart. Owing to the simplicity of mechanical design and the ease of installation, the proposed passive control concept has a potential application to deep water marine risers and tall structures in a wind environment. (C) 2018 Elsevier Ltd. All rights reserved.