Carbon-polymer composites with extreme electrical conductivity

被引：3

作者：

Planes, Emilie ^{[1
,2
]}

Gloaguen, Francois ^{[1
,2
]}

Flandin, Lionel ^{[1
,2
]}

机构：

[1] Univ Savoie Mont Blanc, LEPMI, F-73000 Chambery, France

[2] CNRS, LEPMI, F-38000 Grenoble, France

来源：

JOURNAL OF APPLIED POLYMER SCIENCE | 2015年 / 132卷 / 30期

关键词：

composites; conducting polymers; molding; FILLED POLYPROPYLENE COMPOSITES; MEMBRANE FUEL-CELLS; BIPOLAR PLATES; MECHANICAL-PROPERTIES; NANOCOMPOSITES; PECULIARITIES;

D O I：

10.1002/app.42274

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

The aim of this study was to develop Carbon-polymer composites with extreme electrical conductivity (100 S/cm) combined with good flexural strength. Despite the many optimization methods described in the literature, no comprehensive optimization procedure was to be found because the formulation did not control by itself the final properties. This study showed the major influence of the processing conditions with these peculiar materials. A detailed study of the influence of the processing conditions on the microstructural and macroscopic properties was performed. We, thereby, proposed a comprehensive way to optimize the properties of the final product. (c) 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015, 132, 42274.

引用

页数：8

共 25 条

[1] Investigation on the corrosion resistance of carbon black-graphite-poly(vinylidene fluoride) composite bipolar plates for polymer electrolyte membrane fuel cells [J].

Antunes, Renato Altobelli ;

Lopes de Oliveira, Mara Cristina ;

Ett, Gerhard .

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY, 2011, 36 (19) :12474-12485

[2] Relation between electrical and mechanical properties of conducting polymer composites [J].

Chodák, I ;

Omastová, M ;

Pionteck, J .

JOURNAL OF APPLIED POLYMER SCIENCE, 2001, 82 (08) :1903-1906

[3] The development of economical bipolar plates for fuel cells [J].

Cunningham, Brent ;

Baird, Donald G. .

JOURNAL OF MATERIALS CHEMISTRY, 2006, 16 (45) :4385-4388

[4] Development of bipolar plates for fuel cells from graphite filled wet-lay material and a thermoplastic laminate skin layer [J].

Cunningham, Brent D. ;

Huang, Jianhua ;

Baird, Donald G. .

JOURNAL OF POWER SOURCES, 2007, 165 (02) :764-773

[5]

desOliveira M A L., 2012, J POWER SOURCES, V206, P3

[6] Nanotube networks in polymer nanocomposites: Rheology and electrical conductivity [J].

Du, FM ;

Scogna, RC ;

Zhou, W ;

Brand, S ;

Fischer, JE ;

Winey, KI .

MACROMOLECULES, 2004, 37 (24) :9048-9055

[7] Electrically conductive polymer nanocomposites as deformation sensors [J].

Flandin, L ;

Bréchet, Y ;

Cavaillé, JY .

COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (06) :895-901

[8] Characterization of the damage in nanocomposite materials by ac electrical properties: experiment and simulation [J].

Flandin, L ;

Cavaille, JY ;

Brechet, Y ;

Dendievel, R .

JOURNAL OF MATERIALS SCIENCE, 1999, 34 (08) :1753-1759

[9] Analysis of the non-linear viscoelastic behaviour of silica filled styrene butadiene rubber [J].

Gauthier, C ;

Reynaud, E ;

Vassoille, R ;

Ladouce-Stelandre, L .

POLYMER, 2004, 45 (08) :2761-2771

[10] Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials [J].

Huang, JH ;

Baird, DG ;

McGrath, JE .

JOURNAL OF POWER SOURCES, 2005, 150 :110-119

← 1 2 3 →