Efficient and selective catalytic pyrolysis of cellulose to monocyclic aromatic hydrocarbons over Zn-containing HZSM-5

A series of Zn-containing HZSM-5 (HZ5) with hierarchical pores (xZn(DS)) were obtained by adding different amounts of Zn(NO3)(2) solution in a hydrothermal synthesis process. The performances of xZn(DS) in catalytic reforming of cellulose pyrolysis volatiles were investigated at 500 degrees C. The results showed that the addition of Zn during synthesis increased in the total pore volume of xZn(DS) and reduced the content of strong acid sites, and introduced new weak acid sites. The Zn species were highly dispersed inside the zeolite, and enhanced the accessibility of acid sites, so that the yields of light aromatic hydrocarbons and monocyclic aromatic hydrocarbons (MAHs) over 0.7Zn(DS) (The molar ratio of ZnO/Al2O3 in the synthesis process of xZn(DS) was 0.7) were higher than those over S-HZ5 (Zn was not added in the synthesis process) and commercial HZ5. Compared with S-HZ5, the yield of MAHs over 0.7Zn(DS) increased from 92.8 to 114.1 mg/g and the coke yield decreased by 2.9%. The selectivity of MAHs over 0.7Zn(DS) was 87.7%, which was 5.3% higher than that over S-HZ5. Simultaneously, the increase in mesopores of xZn(DS) accelerated the mass transfer process, shortened the diffusion path and improved the anti-coking performance of the catalysts. In addition, this study also proposed a possible mechanism for the catalyst to adjust the distribution of aromatic products and provided a new idea for promoting the selective production of MAHs for the pyrolysis of cellulose.